All Replies on Questions for upper Shop cabinets: Depth and hanging on drywall with metal studs

  • Advertise with us
View Rick7777's profile

Questions for upper Shop cabinets: Depth and hanging on drywall with metal studs

by Rick7777
posted 10-14-2018 11:02 PM

4 replies so far

View lumbering_on's profile


578 posts in 1336 days

#1 posted 10-14-2018 11:18 PM

With shop cabinets, it’s really up to your preference, and what you’re using it for. Just remember that whatever you put into the cabinets you’re eventually going to have to fish out, and if your looking for a small item way in the back of a 12” or more cabinet, you may not be enjoying your decision.

I hate metal studs with a passion. The best thing I found was to use drywall toggles and avoid the studs all together. I’ve used these toggles with plywood to hang monitors weighting almost 400lbs.

View squazo's profile


185 posts in 2491 days

#2 posted 10-14-2018 11:19 PM

my upper cabinets in the kitchen are 13 inches deep, thats what Im going to use in my shop as well (some day in the future) I dont know what to tell you about the metal studs, depending on the gauge of them you could probably just use tek or sheet metal screws. If its an exterior wall and its load bearing that’s probably a good sign that they are a bit thicker.

View 000's profile


2859 posts in 1745 days

#3 posted 10-15-2018 01:46 AM

I have hung so many cabinets on metal studs I don’t even worry about it.
I usually have a backrail at the top and bottom of the cabinets. I try to put two screws in each backrail on each stud.
12” deep, you get 4 rips out of your 4×8.

If your worried about the metal studs, use french cleats and put some adhesive on them.

View Firewood's profile


1296 posts in 2480 days

#4 posted 10-15-2018 03:41 AM

Metal studs are great for building a nice straight wall. However, they suck for shop wall construction. I’d keep the upper cabinets about the same depth as in the kitchen. Maybe attach a French cleat along the wall using SnapToggles to help distribute the weight.

-- Mike - Waukesha, WI

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics