All Replies on router table

  • Advertise with us
View JIM COLLINS's profile

router table

posted 10-14-2018 03:31 PM

8 replies so far

View JRsgarage's profile


383 posts in 1310 days

#1 posted 10-14-2018 03:50 PM

Would it work if you removed the shop vac connector? Because I don’t think it would be safe to free hand a panel bit. I Think I would just make a quick table on the fly before free hand attempt..

As for a router tables, there are lot of good ones out there and most will handle a panel bit…I have an older Bench dog that I like.

-- “Facts don't care about your feelings.” ..., Ben Shapiro

View JIM COLLINS's profile


35 posts in 3628 days

#2 posted 10-14-2018 08:17 PM

the shop vac connection is part of the fence and will not come apart.

-- Jim in the U.P. nothing like the smell of fresh cut wood

View tacky68's profile


89 posts in 2228 days

#3 posted 10-15-2018 02:21 AM

Jim: I have the Woodpeckers PRP-4-2420, that I got up, and running last weekend. I have done three operations on it, and can not say enough good about it. It is a game changer. Best of luck to you.


View Woodmaster1's profile


1499 posts in 3388 days

#4 posted 10-15-2018 02:35 AM

Try making your own table. I have a rockler table, Kreg table and a homemade table the homemade table is just as good as the purchased table. I found it to be very easy to make the router table. It is bigger than the purchase one and has the Kreg track and a fence that I made. I put a Kreg router lift on it with the money I saved from building the table.

View Lazyman's profile (online now)


5634 posts in 2189 days

#5 posted 10-15-2018 01:22 PM

A router table can be as simple as a piece of plywood with a hole in it and a router attached to the bottom. I made one using plans from Woodsmith 30 years ago (one of my first woodworking projects) and still use it when I need a larger work area than the cheap benchtop Rockler model I bought at a garage sale a few years ago. I simply clamp it to the edge of my workbench or put it on top of a Workmate. It is made so that a fence is attached through groves cut in the top so that you can clamp it down with wing nuts but for a temporary one you could simply clamp a board in place.

BTW, I now attach the router using 3 of these toggle clamps from HF.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View a1Jim's profile


118079 posts in 4378 days

#6 posted 10-15-2018 01:35 PM

I echo Woodmasters thoughts, shop made router tables are better because they can be made to your specifications, I don’t care for the small table tops on store-bought router tables plus you can have so much more storage for all of your router accessories in a shop built tables, lastly if you are new to woodworking building a router table is a good project to learn different operations.


View bondogaposis's profile


5803 posts in 3152 days

#7 posted 10-15-2018 02:45 PM

Build your own router table, if you are wood worker and making cabinets certainly you can build a router table. There must a bajillion plans on the internet for them. Find one you like and modify it to exactly fit your needs. Bigger tops and longer fences are a main advantage of shop built router tables, put wheels on it to make mobile. Storage for all of the accessories and bits that go with routers, is another advantage.

-- Bondo Gaposis

View Robert's profile


3786 posts in 2282 days

#8 posted 10-15-2018 03:36 PM

This is an easy and money saving DIY project.

Make is nice a big. Mine is 27 X 43.

That said, I can see the justification in buying a commercially made fence.

The base can be anything, but something with storage is well worth it.

Here’s mine its patterned off the one Mark Sommerfeld build video on YouTube.

-- Everything is a prototype thats why its one of a kind!!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics