LumberJocks

All Replies on sawmillcreek.org site down?

  • Advertise with us
View wdixon's profile

sawmillcreek.org site down?

by wdixon
posted 10-13-2018 01:30 PM


16 replies so far

View jacww's profile

jacww

35 posts in 1307 days


#1 posted 10-13-2018 01:39 PM

Woody,

It appears to be down. I also get a timeout.

I used http://www.websitedown.info/ to check the site and and got the same result. Looks like a major outage for them.

TonyC

View gwilki's profile

gwilki

264 posts in 1773 days


#2 posted 10-13-2018 02:09 PM

Same here. It is still out this morning – Saturday.

-- Grant Wilkinson, Ottawa ON

View Redoak49's profile

Redoak49

3842 posts in 2288 days


#3 posted 10-13-2018 02:36 PM

They had a lot of power outages in Virginia from the hurricane.

View bandit571's profile

bandit571

22411 posts in 2983 days


#4 posted 10-13-2018 11:02 PM

Any idea as to when it might come back on line? Still down…since about midnight Thursday…

-- A Planer? I'M the planer, this is what I use

View lumbering_on's profile

lumbering_on

578 posts in 790 days


#5 posted 10-13-2018 11:09 PM

The connectivity site I use [isitdownrightnow.com] shows the site being down for over a week.

View syenefarmer's profile

syenefarmer

525 posts in 3380 days


#6 posted 10-13-2018 11:14 PM



The connectivity site I use [isitdownrightnow.com] shows the site being down for over a week.

- lumbering_on

Well, that’s just not true.

As with most things that are storm/hurricane,tornado related, it will be back up and running when it’s back up and running.

View Lazyman's profile

Lazyman

3114 posts in 1687 days


#7 posted 10-14-2018 01:41 PM

According to this (http://70.169.135.35.ipaddress.com/), their IP is located in Gloucester, Virginia. Looks like they had some storm damage and power lines down in the area.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View Jack_Wilson's profile

Jack_Wilson

20 posts in 160 days


#8 posted 10-14-2018 01:51 PM

Same, thanks for posting, I wondered if it was just me.

-- I'm older than I wanna be, and better looking than I should be.

View RobWoodCutter's profile

RobWoodCutter

116 posts in 3530 days


#9 posted 10-14-2018 01:53 PM

Yes,

SMC servers are located about 15 min from where I live and the whole area around Keith’s house was taken down by power outages. Even once the power is restored to the SMC servers, the overhead fiber to the server may still be out. A lot of stuff in this area is run overhead and we have lots of trees.

We had a lot of downed trees on power lines. It does look like they may have power restored by 6pm-10pm tonight. Now sure how long it will take for him to get the servers back up and running and restore connection.

Rob

-- Rob-Yorktown "Shop's still not done, Tools are bought, Wood is bought, need to find time to start a project.."

View lumbering_on's profile

lumbering_on

578 posts in 790 days


#10 posted 10-14-2018 01:57 PM

Well, that s just not true.

As with most things that are storm/hurricane,tornado related, it will be back up and running when it s back up and running.

- syenefarmer

Feel free to go to the site admins and tell them their info is incorrect. Arguing with me isn’t going to change what they display.

View Lazyman's profile

Lazyman

3114 posts in 1687 days


#11 posted 10-14-2018 02:48 PM

Of course when I look up the LJ IP location, the Lat & Long show it to be located in what looks like an independent living facility (The Remington at Valley Ranch) in Irving, TX so take the physical location from this website with grain of salt.

Now I know what I can do when I get too old to live on my own and can no longer make sawdust: Start a server farm.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View RobWoodCutter's profile

RobWoodCutter

116 posts in 3530 days


#12 posted 10-14-2018 04:38 PM

FYI the actual servers for SMC are located in Gloucester, Va.

I have been physically standing next to them.

SMC servers are located at a residence in a detached building on the second floor above Keith’s shop.

Rob

-- Rob-Yorktown "Shop's still not done, Tools are bought, Wood is bought, need to find time to start a project.."

View jacww's profile

jacww

35 posts in 1307 days


#13 posted 10-14-2018 05:37 PM

sawmillcreek.org is back up!

TonyC

View bruc101's profile

bruc101

1311 posts in 3842 days


#14 posted 10-14-2018 05:41 PM

sawmillcreek.org is hosted by Cox Business.

Cox Business is hosted by Incapsula

https://www.cox.com/business/home.html

https://www.incapsula.com/

-- Bruce Free Plans https://traditionalwoodworking.org

View Holt's profile

Holt

280 posts in 2929 days


#15 posted 10-14-2018 07:12 PM

Seems like SMC being located in an independent living facility would me more appropriate…


Of course when I look up the LJ IP location, the Lat & Long show it to be located in what looks like an independent living facility (The Remington at Valley Ranch) in Irving, TX so take the physical location from this website with grain of salt.

Now I know what I can do when I get too old to live on my own and can no longer make sawdust: Start a server farm.

- Lazyman


-- ...Specialization is for insects.

View RobWoodCutter's profile

RobWoodCutter

116 posts in 3530 days


#16 posted 10-15-2018 12:40 PM

sawmillcreek.org is hosted by Cox Business.

Cox Business is hosted by Incapsula

https://www.cox.com/business/home.html

https://www.incapsula.com/

- bruc101

Not sure what you are implying but Cox Business is just providing the commercial pipeline to the internet for SMC servers.

The A/E company I work for has it’s own servers and just use Cox Business as the pipeline for connection to the internet. We host our own website and email server, similar to SMC.

Rob

-- Rob-Yorktown "Shop's still not done, Tools are bought, Wood is bought, need to find time to start a project.."

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com