LumberJocks

All Replies on Which Wood Would Be Best?

  • Advertise with us
View christherookie's profile

Which Wood Would Be Best?

by christherookie
posted 10-08-2018 08:38 PM


8 replies so far

View lumbering_on's profile

lumbering_on

578 posts in 786 days


#1 posted 10-08-2018 09:18 PM

Does this wood have insects in it?

View LittleShaver's profile

LittleShaver

501 posts in 916 days


#2 posted 10-09-2018 12:51 PM

Old barn wood should be dry enough as is. Assuming it hasn’t been stored outdoors. If you think you need it kiln dried, do that first. Drying can introduce new warping and twisting that you may have already planed away.
7% sounds a tad low for a target moisture content. 10-12 seems more like a reasonable range.

-- Sawdust Maker

View tomsteve's profile

tomsteve

916 posts in 1515 days


#3 posted 10-09-2018 01:40 PM

1: spend the $$ on the wood
2:pay to have it kiln dried before-
3: hand plane it.

however, kiln drying might only be an option. any signs of bugs and whats the MC as is?

View Aj2's profile

Aj2

2050 posts in 2094 days


#4 posted 10-09-2018 01:50 PM

I would not kiln dry if you don’t need to. Air dried wood really works nicely with hand tools esp if you plan on hand planing the top.
Black oak sounds awesome.
How or why kiln dried wood changes wood is something we don’t talk about often enough. But it does alway a compromise

-- Aj

View christherookie's profile

christherookie

126 posts in 3343 days


#5 posted 10-09-2018 02:23 PM

It doesn’t appear to have signs of bugs, like holes or trails anywhere. I might hit the place again and ask where the wood came from. From the location of nail holes and discoloration, it appears to be the top of a railing of some sort – but warped a bit more than I would expect. This shop gets most of their stuff from homes remodeled by the local historical society.Maybe from an old stable because it does appear grey and weathered.

View lumbering_on's profile

lumbering_on

578 posts in 786 days


#6 posted 10-09-2018 04:19 PM

From what you’re saying there would be no need to kiln dry it as there is no insects in it. Given the age, the only real issue would have been from insect that can infect any wood, such as termites or carpenter ants. If you don’t see any evidence of it then you should be fine.

As long as you can mill it straight and flat, you should have some excellent wood to work with.

View LesB's profile

LesB

2002 posts in 3739 days


#7 posted 10-09-2018 04:24 PM

Have you considered taking the wood to a commercial shop that can plane it for you? It would save a lot of work and you would end up with nice even pieces of lumber.

-- Les B, Oregon

View HokieKen's profile (online now)

HokieKen

8594 posts in 1435 days


#8 posted 10-09-2018 05:37 PM

If you need to pay to have it KD and have to pay for the wood to begin with, you’d probably be miles ahead if you just buy KD S4S lumber to begin with. It probably won’t cost much more and it’ll save you lots of time.

That being said, if you don’t see signs of bugs, I would assume it’s a non-issue.

-- Kenny, SW VA, Go Hokies!!!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com