LumberJocks

All Replies on Not quite a cabriole

  • Advertise with us
View GatiD's profile

Not quite a cabriole

by GatiD
posted 10-07-2018 01:52 PM


9 replies so far

View bilyo's profile

bilyo

661 posts in 1466 days


#1 posted 10-07-2018 02:45 PM

You need to be more specific. A picture or two would help a lot. What do you mean by “incomplete”, “make a frame”, and “odd set up”?

View bondogaposis's profile

bondogaposis

5371 posts in 2715 days


#2 posted 10-07-2018 06:21 PM

Yeah, pretty hard to envision this without a picture.

-- Bondo Gaposis

View GatiD's profile

GatiD

4 posts in 231 days


#3 posted 10-07-2018 08:19 PM

Absolutely! Here are a few, and thanks for replying!

View lumbering_on's profile

lumbering_on

578 posts in 854 days


#4 posted 10-07-2018 08:41 PM

They sort of look like the legs on an old chair my parents have, but they attache on the top of the leg. Where did you find them?

View GatiD's profile

GatiD

4 posts in 231 days


#5 posted 10-07-2018 08:52 PM

My wife bought them on ebay. Most pics I see of similar legs show these with square stems that come out the top and that are tenoned to a frame. These seem to be emulating that but have joint connections on the back. But I have not yet found any kind of design or pattern that would incorporate legs like this with that way of attaching to a frame. I seem to keep tackling projects that don’t have ready made plans…

View CWWoodworking's profile

CWWoodworking

438 posts in 543 days


#6 posted 10-07-2018 08:53 PM

They have a flat side to attach skirts to. You could make corner blocks and use the threaded insert for extra strength.

Personally I would just pocket hole it together and use a corner block with bolt.

View OG51's profile

OG51

150 posts in 475 days


#7 posted 10-07-2018 08:56 PM

Hopefully I am understanding the question correctly. The design uses a brace that is diagonal to the frame sides to attach the legs (see bad drawing). Once you have the frame you can attach a top with whatever technique you want. I used this type of joinery on some of my pieces so I don’t have to do any mortises.

http://lumberjocks.com/projects/361937

Rockler sells the hardware but there are many companies that also sell them.

https://www.rockler.com/surface-mount-corner-brackets-for-table-aprons?sid=V9146?utm_source=google&utm_medium=cpc&utm_term=&utm_content=pla&utm_campaign=PL&gclid=EAIaIQobChMIhcrZtZv13QIVBQppCh1VFwBfEAQYASABEgKCs_D_BwE

View lumbering_on's profile

lumbering_on

578 posts in 854 days


#8 posted 10-07-2018 09:05 PM

CW’s idea makes a lot of sense. Not really much you else you could do with it, short of attaching a tenon to the back and then using it to mimic a real cabriole leg.

View GatiD's profile

GatiD

4 posts in 231 days


#9 posted 10-09-2018 01:22 PM

Thank you for the replies, I do think that the mounting hardware would be the easiest way to go. I wasn’t sure if I needed to make a box and then figure out how to attach, or if I should integrate the legs into the frame of the box and this clears that right up.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com