LumberJocks

All Replies on Side jointing technique

  • Advertise with us
View nickbatz's profile

Side jointing technique

by nickbatz
posted 10-07-2018 02:10 AM


3 replies so far

View nickbatz's profile

nickbatz

183 posts in 444 days


#1 posted 10-07-2018 02:13 AM

Also, it has a replacement motor on it, but I have the original one – which also weighs a ton.

Is it worth having the original one repaired just because it’s the original one?

This is a 6” 3-blade jointer with a 45” bed. Nothing exotic, but it does look cool. The guy I bought it from actually removed a table top from it – it was being used as a steam punk-looking table!

View Aj2's profile

Aj2

2212 posts in 2162 days


#2 posted 10-07-2018 02:43 AM

For the most part it’s good to add more pressure to the outfeed side after a fair amount of the Board has passed the cutter head. Often I’m just pulling wood across the head with a single motion I have two different pusher or pullers with a single handle. I keep both hands on.
Davis and Wells made some good machines very well built. I have D&W tablesaw love it.

-- Aj

View nickbatz's profile

nickbatz

183 posts in 444 days


#3 posted 10-07-2018 07:19 PM

Thanks Aj.

Yeah, this thing is a serious piece of work – as evidenced by it being around 70+ years.

I feared that the relatively short bed might be an issue, but I was able to run a 5-1/2’ board through no problem.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com