LumberJocks

All Replies on Clamp time

  • Advertise with us
View CWWoodworking's profile

Clamp time

by CWWoodworking
posted 09-26-2018 04:54 PM


11 replies so far

View lumbering_on's profile

lumbering_on

578 posts in 1049 days


#1 posted 09-26-2018 05:12 PM

In theory, since there is no stress on the panels, you could get away with clamping for only 30 minutes, but I haven’t tested that theory. I’ve done it in as little as an hour, but it still takes at least 24 hours before you can do anything with it.

View Fred Hargis's profile

Fred Hargis

5834 posts in 3053 days


#2 posted 09-26-2018 05:14 PM

Franklin says for TII, 30 minutes on unstressed joints. I usually go for an hour, but I do any machining on the panel (planing, drum sanding, etc) for at least 8 hours (Franklin says 24), I will use hand tools on them within a few hours.

-- Our village hasn't lost it's idiot, he was elected to congress.

View Bill Berklich's profile

Bill Berklich

966 posts in 948 days


#3 posted 09-26-2018 05:16 PM

For quick clamping and tight joints 1-2 hours. If I’m taking out a twist or bow then 6-8. That’s using Titebond II.

-- Bill - Rochester MI

View pottz's profile

pottz

7010 posts in 1544 days


#4 posted 09-26-2018 05:26 PM

yeah ive done as little as 30-40 minutes if i need to free up clamps but i try and give it a few hours at least,this is with tbII.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View WoodenDreams's profile

WoodenDreams

830 posts in 470 days


#5 posted 09-26-2018 07:55 PM

I make primarily Cedar and Hope Chests. So, I try to wait 20 to 24 hours, for Lids and the walls. On the Memorial boxes I’ll wait 6 hours if I’m not using a router on it directly after. Depends on your project. Normally while waiting, there is another part of your project you can do while waiting for it to cure, or work on another project while waiting. This is where extra clamps come in handy. With all my glue ups, sometimes I’m using 29 24” U-clamps at a time

View JADobson's profile

JADobson

1448 posts in 2670 days


#6 posted 09-26-2018 08:09 PM

If I need the clamps, 45-60 minutes. Otherwise at overnight or with how much time I get in my shop, a few days.

-- No craft is very far from the line beyond which is magic. -- Lord Dunsany — Instagram @grailwoodworks

View WoodenDreams's profile

WoodenDreams

830 posts in 470 days


#7 posted 09-28-2018 01:33 AM

Read a old article today in Wood Mag. It said 2 hours and you should be good to go. But another source says full curing time on hide glue is 12 hours, most other wood glue is 24 hours. Another source, a book from “Nick Engler” says if to sand or machine the glued pieces you should wait for full cure before you do.

View ArtMann's profile

ArtMann

1446 posts in 1375 days


#8 posted 09-28-2018 04:37 AM

If you want the most accurate answer, read the directions on the bottle. Why take the word of an anonymous person on the internet when you can get the answer straight from the company whose reputation and business success depends on knowing and telling you the truth.

View Rich's profile

Rich

5001 posts in 1149 days


#9 posted 09-28-2018 04:40 AM


If you want the most accurate answer, read the directions on the bottle. Why take the word of an anonymous person on the internet when you can get the answer straight from the company whose reputation and business success depends on knowing and telling you the truth.

- ArtMann

+1. Finally, the voice of reason.

View CWWoodworking's profile

CWWoodworking

528 posts in 738 days


#10 posted 09-28-2018 11:14 AM

Thanks guys. Thought I was safe. Nice to hear what others do.

View pottz's profile

pottz

7010 posts in 1544 days


#11 posted 09-28-2018 01:30 PM


If you want the most accurate answer, read the directions on the bottle. Why take the word of an anonymous person on the internet when you can get the answer straight from the company whose reputation and business success depends on knowing and telling you the truth.

- ArtMann

+1. Finally, the voice of reason.

- Rich


DITTO!

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com