LumberJocks

All Replies on Ever get anything stuck in your skin you can't get out? Any tricks on what to do?

  • Advertise with us
View AM420's profile

Ever get anything stuck in your skin you can't get out? Any tricks on what to do?

by AM420
posted 09-24-2018 03:13 PM


24 replies so far

View 000's profile

000

2859 posts in 1264 days


#1 posted 09-24-2018 03:26 PM

Get a shovel and dig it out.
Don’t do anything and see if it festers up, then it will be easier to find, then dig it out.
If it doesn’t fester and the pain goes away all is good.

View HokieKen's profile

HokieKen

9254 posts in 1503 days


#2 posted 09-24-2018 03:29 PM

As a former machinist, I can say that if I walk by a strong magnet, my hands get tugged a little bit from all the slivers embedded over the years. ;-) It’ll most likely work itself out eventually. Personally, I make sure I stay current on my Tetanus shots. Unless it was some really corroded metal or it had some potentially harmful chemicals of some sort on it, I would just leave it be. If it really bothers you, the ER can find and remove it. Stay safe!

-- Kenny, SW VA, Go Hokies!!!

View Nubsnstubs's profile

Nubsnstubs

1537 posts in 2095 days


#3 posted 09-24-2018 03:41 PM

Get over to your local drug store, and get a disposable flashlight that doctors use. Turn it on and cover the bulb with the offending finger. If it’s a piece of metal, it might show as a dark spot. Wash your hands first! Like the others said, don’t worry about it until you know there is going to be a problem…......... Jerry (in Tucson)

-- Jerry (in Tucson) www.woodturnerstools.com

View Markslawes's profile

Markslawes

103 posts in 271 days


#4 posted 09-24-2018 03:50 PM

I keep a £1 pair of +5 reading glasses in the shed that you get from Pound stores as we call them in the UK, You would be surprised just what you can see close up with them. Handy tool to keep in your workshop. When I get a metal sliver or splinter in my fingers, no matter how small these glasses always deliver….. Then its the wife’s eye brow tweezers to finish the job.

-- If your going to your mums.... can I go in the shed ?

View DBDesigns's profile

DBDesigns

217 posts in 362 days


#5 posted 09-24-2018 03:51 PM

Excellent source of iron for your metabolism.

-- I remember when Grateful wasn't Dead

View GR8HUNTER's profile

GR8HUNTER

5974 posts in 1077 days


#6 posted 09-24-2018 03:57 PM

sometimes I get a tiny cut that feels like that wait a week see what happens if splinter you will know by then …. GOOD LUCK :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View lumbering_on's profile

lumbering_on

578 posts in 855 days


#7 posted 09-24-2018 04:07 PM

It could be pretty much anything, but as others have noted, it will likely just work itself out within a few days, and won’t be anything other than annoying. If it starts getting red and warm then you have an infection, and you should look at getting it out.

I used to work with medics, and their advice was when you first notice the red, you should take a quick look with a magnifying glass to see if you can see the sliver. If you can, then you can use a needle to dig it out. Just make sure you sterilize the needle, by heating it with a flame for a couple of seconds, then let it cool and dip it in rubbing alcohol. Then rub the area with rubbing alcohol, and start digging. When you’re finished, apply a cream such as Bactoban or Polysporin and cover with a dressing or a Bandaid it it’s a small enough wound.

Don’t use hydrogen peroxide as this will actually start killing cells and will delay the healing.

If you can’t see anything then you should wait a day and see if you can see something coming up. If not, then you should see your doctor as may not have anything left in your finger, but the infection needs to be taken care of.

View TheFridge's profile

TheFridge

10858 posts in 1851 days


#8 posted 09-24-2018 04:07 PM

In my short time as an owner of a mill, that those slivers are little spears of hatred that must be dug out with the pocket knife at the end of the night.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View BlasterStumps's profile

BlasterStumps

1298 posts in 804 days


#9 posted 09-24-2018 05:13 PM

I have an interest in rocks and minerals so I have a low-power, boom, zoom stereo microscope. With it I can get a good up close look at whatever. Like all of you, as a result of working on wood and metal in my shop or, picking raspberries, I frequently get the tiny stickers, slivers, and occasionally the big sliver. I sit down at the microscope and dig them out with a sharp needle. My eye sight is so bad that without that magnification, I wouldn’t have a chance of getting some of them out. Sometimes I still can’t remove a sticker or sliver so I just let it fester and usually it will be easier to remove then.

-- "I build for function first, looks second. Most times I never get around to looks." - Mike, western Colorado

View BilltheDiver's profile

BilltheDiver

260 posts in 3250 days


#10 posted 09-24-2018 05:24 PM

I have occasionally resorted to use a pair of fingernail clippers to slowly excavate the skin until the sliver appears and is removed. It’s less painful than digging with a blade or a pin. Sterilize first, of course.

-- "Measure twice, cut once, count fingers"

View Ripper70's profile

Ripper70

1263 posts in 1273 days


#11 posted 09-24-2018 06:42 PM

You can use a neodymium magnet to remove a metal splinter.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View Steve's profile

Steve

1225 posts in 947 days


#12 posted 09-24-2018 08:38 PM

Could be worse. In HS, I had gotten a metal sliver stuck in my eye. Had to sit there while the eye dr drilled out the rust. I learned my lesson and wear safety glasses all the time now.

You may be able to put some glue over the area and let it dry. then peel it off and see if it grabs the sliver with it.

View lumbering_on's profile

lumbering_on

578 posts in 855 days


#13 posted 09-24-2018 10:11 PM



Could be worse. In HS, I had gotten a metal sliver stuck in my eye. Had to sit there while the eye dr drilled out the rust. I learned my lesson and wear safety glasses all the time now.

You may be able to put some glue over the area and let it dry. then peel it off and see if it grabs the sliver with it.

- Steve

I think you win the Worst Sliver award. I couldn’t even imagine having to go through that, especially if the doctor decided to add a lecture to the treatment.

View 000's profile

000

2859 posts in 1264 days


#14 posted 09-24-2018 10:31 PM


Could be worse. In HS, I had gotten a metal sliver stuck in my eye. Had to sit there while the eye dr drilled out the rust. I learned my lesson and wear safety glasses all the time now.

You may be able to put some glue over the area and let it dry. then peel it off and see if it grabs the sliver with it.

- Steve

Yep, I had to have a rust ring scraped of my eye from a piece of metal, (not a sliver.)

After that I found this nifty eye tool,
One end is a smooth magnet head for metal, the other is a fishing line loop for debris. Works great.
The ends screw on and reverse to go back into the tube.

View oldnovice's profile

oldnovice

7475 posts in 3732 days


#15 posted 09-24-2018 11:18 PM

Not to make fun of your plight but …..
Many years ago my lead engineer got a metal sliver in one of his fingers.
He went to the factory nurse who told him to sit down while she got the alcohol, tweezers, and antiseptic.
Ed was not a patient man but he sat down and waited.
After what he thought was way too long he took out his pocket knife and cut the sliver, along with some finger, off and laid it down on the exam table.
He got up and told the nurse ”you can get it out when you are ready, I have work to do!

-- "I never met a board I didn't like!"

View diverlloyd's profile

diverlloyd

3470 posts in 2222 days


#16 posted 09-24-2018 11:24 PM

I’m a fan of a exacto knife to take out slivers.

View WoodenDreams's profile

WoodenDreams

586 posts in 275 days


#17 posted 09-24-2018 11:45 PM

What I’ve done in the past is take a utility knife and scrape the skin several times with the flat edge to see if it works. you’ll at least find the exact area. you may be able to cut it out if not deep. Never any fun.

View msinc's profile

msinc

567 posts in 868 days


#18 posted 09-25-2018 02:16 AM

This is probably going to come as a galactic shock, but the real trick is to find a good doctor and let him or her do it…..I used to perform all my own surgery when it came to “foreign object under skin” and I was lucky. One of my friends got a splinter one day while we were working. He played around and tried to get it. Then he figured it would work it’s way out. Bad idea!!!! He almost ended up losing his hand. He spent two weeks in the hospital on anti-biotics trying to get the infection down so they could operate. Then he went in to surgery and came out with about 200 stitches in the palm of his hand before they finally found it. After the stitches were removed, he only spent another 6 months in therapy to get full use of his hand back.
One only has to go thru or witness something so simple go this bad before you realize…It aint worth it!!!! Dude!!!! Go to the doctor!!!!!

View JADobson's profile

JADobson

1423 posts in 2476 days


#19 posted 09-25-2018 02:28 AM

Wasn’t there a post here a few years back about a surgeon working on his buddy in the wood shop? Something like this after a few too many drinks?

-- No craft is very far from the line beyond which is magic. -- Lord Dunsany — Instagram @grailwoodworks

View corelz125's profile

corelz125

701 posts in 1341 days


#20 posted 09-25-2018 06:39 PM

The eye dr visits arent to bad it hurts more having the metal in your eye then when they take it out. Good old reliable duct tape worked for me on occasion for small pieces I couldnt see.

View Fresch's profile

Fresch

426 posts in 2285 days


#21 posted 09-26-2018 03:30 PM

I had a tick that a doctor had to remove once.

View lndfilwiz's profile

lndfilwiz

112 posts in 1965 days


#22 posted 09-26-2018 04:35 PM



The eye dr visits arent to bad it hurts more having the metal in your eye then when they take it out. Good old reliable duct tape worked for me on occasion for small pieces I couldnt see.

- corelz125

I have removed splinters with adhesive tape directing on the splinter. Take it off the next day and the offending splinter should come up with the tape,

-- Smile, it makes people wander what you are up to.

View Markmh1's profile

Markmh1

102 posts in 808 days


#23 posted 09-28-2018 12:52 PM

IF you can see it, those antique tools for doing ink drafting work very well.

Maybe an older fellow could post a picture of what I’m talking about.

Mark

View MrRon's profile

MrRon

5441 posts in 3608 days


#24 posted 09-28-2018 03:52 PM



IF you can see it, those antique tools for doing ink drafting work very well.

Maybe an older fellow could post a picture of what I m talking about.

Mark

- Markmh1


They are called “ruling pens”. I have some from my ink drafting days that now serve as tweezers.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com