LumberJocks

All Replies on Laminate countertop

  • Advertise with us
View Hornnumb2's profile

Laminate countertop

by Hornnumb2
posted 09-22-2018 11:10 PM


5 replies so far

View therealSteveN's profile

therealSteveN

4348 posts in 1142 days


#1 posted 09-23-2018 03:39 AM

Are you doing this in lieu of a repair? There are a number of repairs you can do, some fairly easily. More info on the problem, reason why you want something new down, if it’s just the look, that is fine

If you just want a different look I’d spend some times with 60/80 grit, and really rough it up. The base usually used for Formica is OSB or particle board, both are fairly rough. If you put it on something slick, it won’t adhere well. If it was a larger job, and the prep took long, or cost $$$$ to get done, or do, then it may be quicker, and cheaper to just pull off the existing tops, and start from scratch. If you buy the material, and do the fabrication, Formica is fairly inexpensive.

-- Think safe, be safe

View verdesardog's profile

verdesardog

171 posts in 3179 days


#2 posted 09-23-2018 04:22 AM

To remove the old laminate just lift a corner and squirt a bit of lacquer thinner between the laminate and substrate, it will dissolve the glue. It will probably take some time and fussing but should all come off fairly easily. Make sure you do this where there is good ventilation and no open flames around, lacquer thinner is explosively flammable!

-- .. heyoka ..

View AlaskaGuy's profile

AlaskaGuy

5460 posts in 2877 days


#3 posted 09-23-2018 05:07 AM

If the old laminate is sound mean still well bonded to the substrate you can do as you suggest.

-- Alaskan's for Global warming!

View Hornnumb2's profile

Hornnumb2

38 posts in 1396 days


#4 posted 09-23-2018 05:14 AM

Changing to a new color, and didn’t teally want to buy some new mdf. So would it be better to remove the old laminate or just sand and install new?

View AlaskaGuy's profile

AlaskaGuy

5460 posts in 2877 days


#5 posted 09-23-2018 05:29 AM


Changing to a new color, and didn’t teally want to buy some new mdf. So would it be better to remove the old laminate or just sand and install new?

- Hornnumb2

That pretty your call depending on how much work you want to do. Just remember the dark color on the edge that shows with be twice as thick as before.

-- Alaskan's for Global warming!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com