All Replies on Jointer transporting on a small trailer...?

  • Advertise with us
View kocgolf's profile

Jointer transporting on a small trailer...?

by kocgolf
posted 09-20-2018 09:00 PM

6 replies so far

View Rich's profile


5868 posts in 1437 days

#1 posted 09-20-2018 09:13 PM

No problem laying it down. You can also pretty easily detach the jointer from the stand. I’ve moved my JJ6 several times without any issues.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View fivecodys's profile


1647 posts in 2484 days

#2 posted 09-20-2018 09:17 PM

I used to have one of those trailers. Man, did it ever bounce…even with my motorcycle on it.
I have the same jointer too!
You can take the top half of the jointer off the stand pretty easily.
If I remember it’s just four bolts that hold it on there.
You will have to loosen the motor to get the belt off but that’s no big deal either.
With the two pieces apart you could probably even put it in your car.

If you do choose to haul it lying down on it’s face, Take the two handles (wheels) off along with the guard.
I’d take the handle off the fence too. Anything that might bounce loose and off the trailer.
I would be more inclined to haul it on it’s back I think,
Resist lifting it by the tables. They are not designed to hold the weight and could be damaged.
We lifted mine out of the truck (as two pieces) by the frame that the table attaches to.
It’s awkward at best.

All of this is just my 2-cents.

-- A bad day woodworking is still better than a good day working.

View Runner's profile


86 posts in 1621 days

#3 posted 09-20-2018 09:20 PM

I would take the top (jointer) off the stand. Should be as easy as removing the drive belt and bolts. Need two people to lift.

-- Kjell - Eau Claire WI

View kocgolf's profile


408 posts in 3026 days

#4 posted 09-21-2018 11:46 AM

Thanks guys, all very reassuring and helpful. I am going to go without the trailer, just the mid-size suv. Lay the seats down and take it apart. It’s so dang windy today in Minnesota that I don’t even want to mess with the trailer.

View John Smith's profile

John Smith

2655 posts in 1011 days

#5 posted 09-21-2018 12:33 PM

Cody – I was helping my brother transport his Harley with my trailer.
after we got it loaded, he brings out a box of orange straps.

and I said to him – - – we are transporting this $35,000.00 motorcycle
800 miles and you are going to tie it down with some $3.00 straps from HARBOR FREIGHT ???
you could see the color drop from his face. (we ended up using heavier, more expensive straps).

you can transport anything with anything – - – just be smart about it.


-- there is no educational alternative to having a front row seat in the School of Hard Knocks. --

View kocgolf's profile


408 posts in 3026 days

#6 posted 09-23-2018 01:23 PM

Disassembling was a snap and it went right into the back of the Sante Fe like butta. Happy to have it but it needs love. Luckily I really enjoy tearing down and rebuilding stuff, making it shiny and awesome again. Sense of accomplishment and all. Can’t wait to get this shiny and tuned!

I have already finished the fence assembly, and pulled the cutterhead to de-rust and put in new bearings. Does anyone know how exactly to get the tables themselves disconnected?. I want to get the dovetails sleds all cleaned and everything. This thing was never hooked to dust collection, or cleaned, and had been sitting a long while.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics