LumberJocks

All Replies on Blemish On Teak Tabletop After Sanding

  • Advertise with us
View SleepingFox's profile

Blemish On Teak Tabletop After Sanding

by SleepingFox
posted 09-19-2018 07:03 PM


3 replies so far

View Aj2's profile

Aj2

2138 posts in 2131 days


#1 posted 09-19-2018 07:17 PM

Looks like you sanded through the teak veneer. That table is most certainly plywood with a veneer.

-- Aj

View SleepingFox's profile

SleepingFox

23 posts in 264 days


#2 posted 09-20-2018 12:59 AM

Ah, I’ll stop sanding then. Thanks!

View Lazyman's profile

Lazyman

3230 posts in 1720 days


#3 posted 09-20-2018 01:26 AM

Yup, you sanded through the veneer. Most furniture, especially exotic woods, are very thin veneer over particle board or MDF these days so you don’t have much room for sanding. For future reference, your best bet for removing the iron stain was probably to use a chemical stripper to remove the finish and then oxalis acid solution to remove the iron stain. If you need to scrub, use a synthetic steel wool.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com