LumberJocks

All Replies on Just starting

  • Advertise with us
View DanBman's profile

Just starting

by DanBman
posted 09-14-2018 07:23 PM


6 replies so far

View John Smith's profile

John Smith

1833 posts in 555 days


#1 posted 09-14-2018 08:03 PM

THANK YOU for your dedicated service !!!
and welcome to the trenches.

oh – and stay away from TED’S WOODWORKING PLANS !!
it is a bad site full of malware.

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View Bill_Steele's profile

Bill_Steele

515 posts in 2124 days


#2 posted 09-14-2018 08:06 PM

I’m no expert, but I’ll chime in…..

It sounds like rolling carts might be the best option for you. I think dedicated stations is the most efficient way to work, but since you likely have a need to be able to move tools or work surfaces to accommodate other operations (e.g. car repair, car parking, floor cleaning/sweeping, arranging machines for long rips or other operations, access to electrical outlets, etc.) I think mobile is the way to go.

I would slightly overbuild the carts, and use a good quality polyurethane caster. Casters that swivel and lock at all four corners are nice for moving/rotating tools in a small space. Like you said—designing the height/width of the carts such that you can use other cart(s) as out-feed/in-feed support for other tools is ideal (e.g. the finished height of the planer cart plus the planer allow you to use the top of the planer as out-feed support for your bandsaw).

I don’t have any plans, but I can post a few pictures of the mobile bases I made for my planer, bandsaw, and jointer if you are interested.

View fivecodys's profile

fivecodys

1427 posts in 2029 days


#3 posted 09-14-2018 08:10 PM

Yes, Thank you for your service!!

I have my planer and miter saw on a flip top cart. If I had to do it over I would probably put the miter-saw on a standard top cart and maybe add my scroll saw to the flipper.

I had my Rigid Sanding center on it once and when I flipped it every thing fell out and some of the washers even went into the base of the machine. Huge mistake!

Search the web. There are a ton of plans out there from the likes of “WOOD Magazine” to “Shop Notes” and even some free plans offered by You Tube Creators.

Enjoy!

-- When you leave your shop for the night, make sure you can always count to 10.

View John Smith's profile

John Smith

1833 posts in 555 days


#4 posted 09-14-2018 09:32 PM

I don’t use my miter saw much anymore now that I am retired.
but, one of the better designs I made for it was to build the mobile
base cabinet to where the miter saw cut table was flush with the table saw.
just something to consider when you start making mobile stations that can perform multiple tasks.

.

.

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View Redoak49's profile

Redoak49

3998 posts in 2381 days


#5 posted 09-14-2018 09:51 PM

I have every tool on rolling carts or rolling bases.

View mathguy1981's profile

mathguy1981

93 posts in 297 days


#6 posted 09-15-2018 12:21 AM

Mobile bases are excellent, and if I may offer one suggestion is that if you’re building your own, castor brakes aren’t enough. You need to design a system that bottoms out the base to the floor (or plants feet, via ready rod) so you’re not trying to use a miter saw and the damn thing is moving around on you. Just not safe, is my thinking.
Grizzly sells the Shop Fox mobile bases for $60-80 each, and they’re all metal. Won’t save you money, but would save you time.

-- Two thumbs and counting

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com