LumberJocks

All Replies on loosse bearing

  • Advertise with us
View oldnovice's profile

loosse bearing

by oldnovice
posted 09-11-2018 08:49 PM


7 replies so far

View madts's profile

madts

1889 posts in 2638 days


#1 posted 09-11-2018 09:01 PM

I would imagine that a loose bearing is as bad as a bad bearing. maybe your old bearing froze and wore out the shaft.

—Madts.

-- Thor and Odin are still the greatest of Gods.

View DeLayne Peck's profile

DeLayne Peck

620 posts in 2499 days


#2 posted 09-11-2018 10:22 PM

Ewww, do you really want to get into that? The latest saws are so nice and affordable. At the same time, a man that cherishes his grandfather’s tools understands the emotional attachment.

-- DJ Peck, Lincoln Nebraska. Lord, keep your arm around my shoulder and your hand over my mouth.

View Jidis's profile

Jidis

14 posts in 362 days


#3 posted 09-11-2018 10:39 PM

I can’t speak for your saw, but I just refurb’d an old Craftsman belt/disc sander with the same deal. I could push them onto the shaft with my hand. This was with the original bearings or the new ones, and I checked different unused spots along the axle to see if it had lost any diameter in the bearing area and it hadn’t, so the slip fit must have been like that since it was born.

Per recommendations, I ended up going with some loctite “retaining compound”. I used the 680, but I believe the 609 would have been the appropriate one for you and I.

Good luck on it!

PS- It would be funny if it’s from the same stock. This thing’s supposed to be for a 1/2” inside bore, but the shaft is a few thou too small.

View Lazyman's profile

Lazyman

3091 posts in 1685 days


#4 posted 09-12-2018 05:12 AM

How loose is loose? Is it just that you can slide it on? Or can you feel some play in it? Are the other bearings on the arbor the same size?

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View oldnovice's profile

oldnovice

7444 posts in 3666 days


#5 posted 09-12-2018 05:25 PM

I believe the bearing became loose from being in the freezer overnight!
I had the arbor shaft/bearing in the freezer with the trunnion in the sun so everything would go together without any “banging” on the parts.
That worked like a charm, the trunion was almost too hot to handle, and the pieces went together with very little effort

I put the old bad arbor shafts in the freezer to see if the bearing would become loose and it did!

Everything is now back together I just need to install the belt pulleys, belt, and belt cover.

This was not a job for someone with RA and just too old to be a mechanic because steel and iron are not as hand friendly as wood!

-- "I never met a board I didn't like!"

View bigblockyeti's profile

bigblockyeti

5492 posts in 2018 days


#6 posted 09-12-2018 05:36 PM

Are you seeing/measuring any radial play or is all of the undesirable movement axial?

-- "Lack of effort will result in failure with amazing predictability" - Me

View oldnovice's profile

oldnovice

7444 posts in 3666 days


#7 posted 09-13-2018 02:27 AM

bigblockyeti, nope!
Got it all put back together late this afternoon and everything is working fine!
A beautiful sound of blade through wood and no bearing noise!

I have turned steel bearing to go along with my link belt and I had a little problem with the Woodruff key when trying to mount the bearing which was due to the slot in the new shaft was .006” shallow compared to the old shaft.

-- "I never met a board I didn't like!"

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com