LumberJocks

All Replies on Storing Tree Parts Outside Until Usage?

  • Advertise with us
View Keith Kelly's profile

Storing Tree Parts Outside Until Usage?

by Keith Kelly
posted 09-08-2018 04:47 AM


7 replies so far

View wuddoc's profile

wuddoc

346 posts in 4104 days


#1 posted 09-08-2018 05:49 AM

View Keith Kelly's profile

Keith Kelly

320 posts in 2050 days


#2 posted 09-08-2018 06:12 AM

To clarify on #1: how long can I let it sit as a log before milling it into rough boards?

-- Keith | Subscribe: https://www.youtube.com/c/KeithsTestGarage

View ArtMann's profile

ArtMann

1381 posts in 1202 days


#3 posted 09-08-2018 01:04 PM

Be advised that large limbs from big trees are under the stress of their own weight while growing and are likely to bow, cup or twist when dried and milled into lumber. I would not try to use this wood for large pieces.

View Keith Kelly's profile

Keith Kelly

320 posts in 2050 days


#4 posted 09-08-2018 03:08 PM



Be advised that large limbs from big trees are under the stress of their own weight while growing and are likely to bow, cup or twist when dried and milled into lumber. I would not try to use this wood for large pieces.

- ArtMann

I’m familiar with reaction wood that you speak of and have experienced it before. Very frustrating to work with.

But, this is free. Not just as in free beer, but as in free good beer.

Still, am I better off to rough saw it now, or can it wait about a month and be fine?

Yes I’m aware that I can’t use this wood for another couple of years, and I’ll finish the milling and surfacing then.

-- Keith | Subscribe: https://www.youtube.com/c/KeithsTestGarage

View TravisH's profile (online now)

TravisH

668 posts in 2321 days


#5 posted 09-08-2018 07:42 PM

Month later isn’t going to hurt anything.

Lots of variable come into play about how long you can wait to mill a log but to soon isn’t really ever an issue. The longer you wait the more issues arise. Splitting, bugs, rot, etc… That said I have milled fire wood years later and got use able pieces for turning and small boxes.

View Steve's profile

Steve

1270 posts in 969 days


#6 posted 09-08-2018 08:34 PM

At the very least, seal the ends and keep the wood off the ground and covered with air flow. You don’t have to mill it all up right now

View Lazyman's profile

Lazyman

3389 posts in 1774 days


#7 posted 09-08-2018 08:37 PM

It’ll be fine. Seal the ends and store it out of sunlight. The longer you wait the more likely it will be that wood boring beetles will attack it. If I remember correctly, they can do damage in just a few weeks so you may want to consider using some Timbor or even just lightly dust the bark with boric acid. Cut trees are like magnets to wood boring beetles

BTW, I just tried Amorseal 2 for the first time a few weeks ago and I am amazed how well it woks to prevent cracks in logs waiting to be milled. Even logs that had started to crack before I applied it haven’t gotten any worse.

Edit: on the bowl blank question, it is usually best to wait to cut them until you are ready to turn them but if you seal the ends and keep out of the sun they will usually be fine. I usually store mine on end which also helps prevent cracking, especially if stored on concrete.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com