All Replies on Looking for a specific router bit

  • Advertise with us
View JetJunkie's profile

Looking for a specific router bit

by JetJunkie
posted 09-05-2018 10:57 PM

8 replies so far

View TravisH's profile


701 posts in 2547 days

#1 posted 09-05-2018 11:13 PM

Doesn’t look like you will be able to use a combination of bits to get the profile. Looks like you could get close however. May have to settle to getting close then using a scratch stock to do final shaping if getting a custom bit made is out.

If possible (not matching other pieces or not sentimental attachment) could just create and replace all the profile on the door with something similar with what you can make with current router bits on hand.

View ArtMann's profile


1462 posts in 1428 days

#2 posted 09-05-2018 11:32 PM

Have you looked through the MLCS website? They have quite a large inventory of edge profile and molding bits.

View Jared_S's profile


284 posts in 571 days

#3 posted 09-05-2018 11:40 PM

I think you will have a rough time finding a bit to match. If its a small amount you could get it close with standard bits and make it match with a scratch Stock.

If you have a shaper, getting a knife to match would be as easy as as phone call to any one of the many knife grinding shops.

View JetJunkie's profile


8 posts in 3983 days

#4 posted 09-06-2018 12:37 AM

I do have a shaper but have always used it as a router sadly. Would I just call a machine shop, or do I just search knife grinders in my area? Thanks all!

-- Nathan, Indiana,

View Kirk650's profile


679 posts in 1360 days

#5 posted 09-06-2018 12:57 AM

If you have a shaper, it shouldn’t be hard to have that profile made for you. I expect that’s what I’d do.

View JetJunkie's profile


8 posts in 3983 days

#6 posted 09-06-2018 02:11 AM

I sent an email to these guys. I’ll see what happens. Thanks for the suggestions!

-- Nathan, Indiana,

View wuddoc's profile


354 posts in 4330 days

#7 posted 09-06-2018 02:35 AM

This may help if you want to outsource the profile work:

We use a Shop Fox moulder and obtain our knives from:


-- Wuddoc

View Jared_S's profile


284 posts in 571 days

#8 posted 09-06-2018 02:45 AM

Woodworkers tool works or oella saw (really any saw sharpening / knife grinding shop) can set you up with a corrugated head and knives custom matched to your profile.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics