LumberJocks

All Replies on Need advice on quarter round finish issue.

  • Advertise with us
View wmsts's profile

Need advice on quarter round finish issue.

by wmsts
posted 02-16-2018 10:39 AM


11 replies so far

View Richard Lee's profile

Richard Lee

254 posts in 1283 days


#1 posted 02-16-2018 11:38 AM

Get some more quarter round.

View Fred Hargis's profile

Fred Hargis

5741 posts in 3001 days


#2 posted 02-16-2018 11:48 AM

The only thing I can think of (well, not the only…but maybe the easiest) would be to get some dye and mix it with the waterborne finish. Then apply another coat. This would take some experimenting to get the color correct (the hard part) but then should be an easy application.

-- Our village hasn't lost it's idiot, he was elected to congress.

View cabmaker's profile

cabmaker

1745 posts in 3316 days


#3 posted 02-16-2018 11:49 AM

Several ways you can do that

First off…..why did you select quarter round in leau off shoe mold ?

Need more info here…....did you stain the oak ?

View OSU55's profile

OSU55

2403 posts in 2497 days


#4 posted 02-16-2018 01:23 PM

Just love it when folks finish without testing. Not worth the time to sand qtr round, throw it away and get some more. I would use dye, and yes you will need several colors to mix to ge the same color as 90 yr aged wood. Depends on how close you want it. You could mess around with regular ob stains like minwax and you might find something you like. The mw wb poly will cover ob stain just let it dry a couple of days and wipe down with 1:1 water/dna before applying the poly. Whatever you do, buy an extra pc of moulding to TEST the entire finish schedule before applying to the pieces to use.

View wmsts's profile

wmsts

6 posts in 607 days


#5 posted 02-16-2018 03:33 PM



Get some more quarter round.

- Richard Lee

Hoping to avoid that, but if I must….

View wmsts's profile

wmsts

6 posts in 607 days


#6 posted 02-16-2018 03:36 PM



The only thing I can think of (well, not the only…but maybe the easiest) would be to get some dye and mix it with the waterborne finish. [....]

Interesting. Might look into this.

View wmsts's profile

wmsts

6 posts in 607 days


#7 posted 02-16-2018 03:39 PM



Several ways you can do that

First off…..why did you select quarter round in leau off shoe mold ?

Need more info here…....did you stain the oak ?

- cabmaker

I chose quarter rounds because the floors are a little rough around the edges. And some of the original trim is still there (isolated in a hallway) and it’s quarter round .

The oak was not stained (neither the floors nor the QR).

View JCamp's profile

JCamp

1004 posts in 1058 days


#8 posted 02-16-2018 03:41 PM

Sanding them all down would work and starting over. A easier way would be to take a few test areas and get some of the stain/poly mix (several colors) and test them out to see which is the best fit. Remember the more you coat them the darker they will get.
Also pics would help

-- Whatsoever thy hand findeth to do, do it with all thy might

View wmsts's profile

wmsts

6 posts in 607 days


#9 posted 02-16-2018 03:43 PM



Just love it when folks finish without testing.
[...]
Whatever you do, buy an extra pc of moulding to TEST the entire finish schedule before applying to the piece.

DIYer who always seems to learn lessons the hard way. [Did painted trim before only, obviously didn’t need to test then].

View wmsts's profile

wmsts

6 posts in 607 days


#10 posted 02-16-2018 03:58 PM



Sanding them all down would work and starting over. A easier way would be to take a few test areas and get some of the stain/poly mix (several colors) and test them out to see which is the best fit. Remember the more you coat them the darker they will get.
Also pics would help

- JCamp

The PS Honey is almost an exact match for the trim. It doesn’t have the be exact, just in that direction. Might be smart to start here.

View LesB's profile

LesB

2201 posts in 3950 days


#11 posted 02-16-2018 09:55 PM

I don’t think you can sand them down enough for a stain to get through the poly you already applied. It will have soaked in to the wood.
Your best bet is to sand them lightly with 220 sand paper. Then apply a couple of coats of poly that you have added color to. The color you use will need to be compatable in which ever form of poly you used; water base or oil base. As some of the snipes said: do some tests first. I’m 90 % certain you can get the results you want doing it this way.

-- Les B, Oregon

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com