LumberJocks

All Replies on Titebond or superglue for this?

  • Advertise with us
View JohnMcClure's profile

Titebond or superglue for this?

by JohnMcClure
posted 02-16-2018 04:10 AM


6 replies so far

View MrUnix's profile

MrUnix

7316 posts in 2533 days


#1 posted 02-16-2018 04:15 AM

I’d just use regular wood glue. You don’t need to clamp it down super tight… just set a book or something with a little bit of weight on top of it while it drys.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View woodbutcherbynight's profile

woodbutcherbynight

5955 posts in 2743 days


#2 posted 02-16-2018 04:38 AM

I agree, heck even some rubber bands would be more than enough.

-- Live to tell the stories, they sound better that way.

View Andybb's profile

Andybb

1856 posts in 937 days


#3 posted 02-16-2018 04:42 AM

Not plus small pilot holes and longish small brass wood screws?? Asking cuz I’m interested in learning and I tend to use overkill when I don’t need to. I know the glue is stronger than the wood but I’d worry it might snap off if bumped.

-- Andy - Seattle USA

View Loren's profile

Loren

10477 posts in 3981 days


#4 posted 02-16-2018 04:48 AM

The short grain of the handle may snap
off if the lid is dropped.

One interesting way to avoid this is by cutting
a slot in the “legs” of the handle with the
table saw and inserting splines with the
grain going the other way.

If done that way the handle might break off
at the joint if dropped. I would probably
spline it and put screws in. Mortise and tenon
would be the old school way to do it. Dowels
could be figured out too. You could glue it then
drill 1/4” holes from beneath and insert dowels
up into the handle.

Making it stronger is an interesting exercise but
if you don’t want to bother just glue is probably
fine.

View JohnMcClure's profile

JohnMcClure

601 posts in 974 days


#5 posted 02-16-2018 12:46 PM

Thank you all for the suggestions. I will go with regular Titebond and clamp very gently.
AndyBB, I too always have to talk myself out of the overkill fastening methods! And it blows me away that rubber band pressure alone would be sufficient. I really need to do an experiment – to convince myself – in which I clamp one joint tightly, one gently, one with rubber bands, and one “rub joint” with no clamps at all.

Loren, the splines sound very smart and M&T would definitely be the strongest method. It’s a light-duty box and not worth the extra time that would take, so I’ll go the easy and fast route.
Thanks again!

-- I'd rather be a hammer than a nail

View Jim Finn's profile

Jim Finn

2692 posts in 3256 days


#6 posted 02-16-2018 01:11 PM

I would just glue it and screw it.

Rubber bands work very well as clamps. I assemble small boxes, I make, using rubber bands as “clamps”.

-- No PHD just a DD214

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com