LumberJocks

All Replies on how cold is your shop?

  • Advertise with us
View Charlie H.'s profile

how cold is your shop?

by Charlie H.
posted 02-13-2018 05:27 PM


10 replies so far

View Ron Aylor's profile

Ron Aylor

2649 posts in 1158 days


#1 posted 02-13-2018 05:50 PM

I have no electricity in my shop … so, below 28° and I have to stay out!

View JCamp's profile

JCamp

1004 posts in 1061 days


#2 posted 02-13-2018 05:51 PM

Entirely depends on how bad I want out of the house LOL

-- Whatsoever thy hand findeth to do, do it with all thy might

View ArtMann's profile

ArtMann

1435 posts in 1326 days


#3 posted 02-13-2018 05:54 PM

My shop is heated but I will work out there without it when the temperature is above 55 or so. The work keeps me warm.

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

16190 posts in 3129 days


#4 posted 02-13-2018 05:58 PM

30 degrees is too cold. 50 degrees works, but only when I know the heater’s been turned up a bit and things will get a little warmer. 60 degrees in winter is right on the mark for me.

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

View LesB's profile

LesB

2203 posts in 3953 days


#5 posted 02-13-2018 06:20 PM

Below 50 degrees my hands get too cold to work for very long.
Also glue will not set at those temperatures and finishes will not dry/cure.

-- Les B, Oregon

View LittleShaver's profile

LittleShaver

586 posts in 1130 days


#6 posted 02-13-2018 07:13 PM

Needs to be 50 or better in the shop for comfort and drying/curing.

-- Sawdust Maker

View jimintx's profile

jimintx

921 posts in 2095 days


#7 posted 02-13-2018 07:46 PM

I would not be happy at 50 or below.

In Houston it isn’t too tough to achieve a nice winter temp of anywhere from 60 to 70 degrees. I do it in a 21’ x 21’ space with just one or two cheap little electric place heaters.

I am equally concerned about keeping the humidity down. Some days I only run a dehumidifier in there.

It’s a much bigger challenge, or cost anyway, to keep it cool enough throughout the other 10 months of the year!

-- Jim, Houston, TX

View papared's profile

papared

5 posts in 617 days


#8 posted 02-13-2018 08:29 PM

I keep my mini-split around 65* in the winter. I like it where I can wear a heavy weight tee shirt with my work apron and be comfortable.

Red

-- Papa Red

View Charlie H.'s profile

Charlie H.

388 posts in 1161 days


#9 posted 02-13-2018 09:36 PM

Thanks for the feedback.
@ 50 my hands are cold enough my fingers seem to slide on the wood and I don’t trust my grip.
Seems like that’s common.
Since I am in Dallas by next month I will probably be wondering how hot y’all can stand it to be.

-- Regards, Charlie in Rowlett, TX --------I talk to myself, because sometimes I need expert advice.---------

View olegrump's profile

olegrump

97 posts in 733 days


#10 posted 02-15-2018 03:15 PM

Gotta be at least 50 degrees. Otherwise it’s too cold for me to do any work and “The Boss” will give me Hell for even going out there.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com