All Replies on Need Help Replicating Cabinet Door

  • Advertise with us
View ellisafa's profile

Need Help Replicating Cabinet Door

by ellisafa
posted 02-12-2018 05:21 PM

2 replies so far

View LesB's profile


2301 posts in 4045 days

#1 posted 02-12-2018 06:50 PM

The frames may have been cut with a moulding machine so if you don’t have one you might find a shop that does and is willing to make them.
If I had to do it myself I would probably use a build up method with at least two different pieces of wood so I could cut part of the pattern on each piece and glue them together.

Also I have had success in the past using a shaper blade on my table saw. The three wing shaper blades can be ground to what every shape you need and in this case you may need to make two or three passes with different cutters to get the final results. It would involve having a piece of wood wider than the final product to support the narrow part during the shaping process (you are cutting on the underside of the wood) and then cutting it off. There are shapers that have only one cutter which would eliminate the need to get three ground to the identical shape but they are slow and the cuts can be rougher.

-- Les B, Oregon

View ellisafa's profile


5 posts in 706 days

#2 posted 02-14-2018 08:02 PM

Les, Thank you for the reply! I may just see if I can find this mitered door from a different company

-- John, Round Rock, TX

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics