All Replies on Jet Table Saw Pricing

  • Advertise with us
View Cheapguy82's profile

Jet Table Saw Pricing

by Cheapguy82
posted 02-11-2018 06:34 PM

5 replies so far

View Loren's profile


10477 posts in 4213 days

#1 posted 02-11-2018 06:54 PM

$250 maybe. You could hold out for more
but be prepared to store it for awhile.

View RustyHacksaw's profile


145 posts in 1829 days

#2 posted 02-11-2018 09:19 PM

I was gonna say $200. I think that’s about it.

View myxology's profile


95 posts in 1806 days

#3 posted 02-15-2018 02:53 PM

I have that same table saw and I bought mine for $300 about 3 years ago. I also live in California, so you’ll want to figure that in too. It also came with a pretty good set of accessories, some plywood hold downs (I don’t know what to call them), a nice dado blade set, some featherboards, and an Incra Miter Guage that is probably worth nearly $100 on it’s own.

Hope that helps. Good luck with your sale!

-- Is this thing plugged in?

View knotscott's profile


8347 posts in 3941 days

#4 posted 02-15-2018 03:19 PM

I agree with the consensus range so far….$200-$300. Looks clean. It’s a good basic Taiwanese contractor saw with a functional fence. The knocks will be steel wings, right tilt, no riving knife, and an outboard motor. If you have the blade guard, it’d be helpful. Lots of potential for someone though. Good luck!

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Bill_Steele's profile


606 posts in 2297 days

#5 posted 02-15-2018 05:49 PM

I have this exact same saw. I think I paid $500-$600 when I bought it new about 20 years ago.

It looks to me like the fence has been cut down—but maybe it’s just the way it looks in the pictures. I also see that the original on/off switch (mounted to the fence) is missing and someone has wired a light switch as the on/off switch. The lock knob on the fence is also not original or perhaps the plastic has broken off and only the internal part is left. The rubber plugs at each end of the fence are also missing. I don’t see the safety gear (e.g. blade guard/splitter with integrated pawls)—I assume it is missing.

Assuming it has the original motor—I would say that $100 would be a fair price.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics