LumberJocks

All Replies on straight edge

  • Advertise with us
View plang's profile

straight edge

by plang
posted 02-11-2018 04:52 PM


7 replies so far

View Loren's profile

Loren

10477 posts in 4183 days


#1 posted 02-11-2018 04:59 PM

I’ve found 24” adequate for most woodworking.

For longer I use a 78” level. I have one that
got bent though so I had to replace it.

I don’t recall using a straight edge to adjust a
table saw. I’m not sure what you’re doing but it
can probably be managed without investing in
a new tool.

View Andre's profile

Andre

2826 posts in 2341 days


#2 posted 02-11-2018 05:03 PM

Lee Valley sells a few different types, I have the 24” steel one, so far all I really need.

-- Lifting one end of the plank.

View Redoak49's profile

Redoak49

4232 posts in 2524 days


#3 posted 02-11-2018 05:18 PM

I have the Lee Valley 38” aluminum straight edge which is about $42. It has worked well for me in machine setup.

View Holt's profile

Holt

280 posts in 3164 days


#4 posted 02-11-2018 07:03 PM

I think you picked the right one out of the gate. The guys at Carbide Processors are incredible. I buy all my Woodpecker stuff from them!

-- ...Specialization is for insects.

View bondogaposis's profile

bondogaposis

5555 posts in 2886 days


#5 posted 02-11-2018 08:20 PM

These look pretty good for the price.

-- Bondo Gaposis

View woodcox's profile

woodcox

2367 posts in 2547 days


#6 posted 02-11-2018 08:29 PM

I borrowed our steel 24” cylinder head SE from work and trusted it. I also checked some long extruded aluminum from a pet door against the edge and found it adequate also.

All good prices cited at length that I have seen.

-- "My god has more wood than your god" ... G. Carlin.

View John_'s profile

John_

215 posts in 2241 days


#7 posted 02-12-2018 01:17 AM

Another vote for Lee Valley

You were thinking of spending around $60 for 36”. Lee Valley has their Veritas brand in aluminum. 38” for $41 (these look very similar to the ones bondogaposis posted. Right now Lee Valley has free shipping and you probably would not pay sales tax)

You can always step up to a Starret 36” in steel but that will set you back $212!

Link to the aluminum ones. I have their 50” and a 24”
http://www.leevalley.com/us/wood/page.aspx?p=50074&cat=1,240,45313,50074

I will add that Woodpecker makes a 36”

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com