All Replies on Type of wood for furniture

  • Advertise with us
View Woodyvolt's profile

Type of wood for furniture

by Woodyvolt
posted 02-04-2018 02:47 PM

19 replies so far

View Sawdust4Blood's profile


408 posts in 3502 days

#1 posted 02-04-2018 03:02 PM

The issue that I would have with pine is the softness. Of course it also depends on the style. If she wants a rustic country look, pine might be the best choice. Otherwise, I would consider poplar as an alternative. Still fairly inexpensive but harder.

-- Greg, Severn MD

View mahdee's profile


4291 posts in 2248 days

#2 posted 02-04-2018 03:02 PM

I guess it depends on what you are making. Most big box store purchase of construction pine will more likely develop cracks as they fully dry and or are exposed to heat from sanding and such. If that is what you are going to use, it is best to let them dry indoors for sometime or fill-in the cracks if they develop. Best option might be plywood.


View johnstoneb's profile


3125 posts in 2653 days

#3 posted 02-04-2018 03:08 PM

My DIL likes to paint a lot of things for those she gets, pine, fir, and plywood. I actuall find the soft wood harder to work with.

-- Bruce, Boise, ID

View Firewood's profile


925 posts in 2115 days

#4 posted 02-04-2018 03:11 PM

I agree with sawdust4blood. Pine is too soft and unless you purchase clear (no knots or voids), the defects will be visible through the paint. Poplar is good for painted furniture.

-- Mike - Waukesha, WI

View Rich's profile


4826 posts in 1070 days

#5 posted 02-04-2018 04:06 PM

+1 Poplar

-- There's no such thing as a careless electrician

View JBrow's profile


1368 posts in 1401 days

#6 posted 02-04-2018 04:26 PM


I am just completing a set of shelves for a family member. She wanted the shelves painted. My choice of wood was maple, although I considered poplar. Maple is more durable, works well, and paints up nicely. The only negative with maple is that is twice the price of poplar in my area.

I dislike pine because the resins in the wood foul sandpaper much faster and pitch builds up on the tools requiring more frequent cleaning. But if the resins in pine are not an issue, then I see nothing wrong with kiln dried furniture grade pine.

View Carloz's profile


1147 posts in 1072 days

#7 posted 02-04-2018 04:56 PM

Poplar is the best material for painted furniture.

View bondogaposis's profile


5518 posts in 2832 days

#8 posted 02-04-2018 05:11 PM

Poplar is much more suitable for painted furniture than pine. No resins and more uniform, harder than pine, takes paint well.

-- Bondo Gaposis

View TheFridge's profile


10859 posts in 1967 days

#9 posted 02-04-2018 05:33 PM


-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Andre's profile (online now)


2750 posts in 2287 days

#10 posted 02-04-2018 05:55 PM

Made a Bench Seat for my Daughter(My Favorite one!) out of Pine about 12 years ago, on it’s 3rd house and now 3 Gran Kids and still looks good? LOL! at the time here Alder was about the same price?
Made a writing desk (No Paint!) for the Wife out of Alder and Baltic Birch.

-- Lifting one end of the plank.

View OnhillWW's profile


185 posts in 1713 days

#11 posted 02-04-2018 07:30 PM

My 2C. Beech, birch, maple , alder, poplar. All are hard and close grained, small pored and take paint well. Depends what you can grab locally and at what price.

-- Cheap is expensive! - my Dad

View LesB's profile


2169 posts in 3924 days

#12 posted 02-04-2018 07:43 PM

I agree with the Alder recommendation but you don’t say what part of the country you live in. Some woods are not available everywhere.

-- Les B, Oregon

View Woodyvolt's profile


12 posts in 642 days

#13 posted 02-04-2018 08:42 PM

Thanks to all for the reply’s.

I live in rural central Kansas and only have one local source for material. They do not stock poplar which seems to be the choice of the reply’s.

I will contact them tomorrow and see if they can special order poplar at a reasonable price.

I keep cherry, walnut, and oak to work with but don’t want to use it if it will be painted.

View ArtMann's profile


1425 posts in 1297 days

#14 posted 02-05-2018 03:52 AM

Another possibility is soft (red) maple. unlike what the name says, soft maple is not soft. It is just softer than hard maple. It is considerably harder than poplar and it also takes paint well. Around here, it is a little less expensive than hard maple. I don’t know if it is available in Kansas.

View Aj2's profile


2430 posts in 2279 days

#15 posted 02-05-2018 06:40 AM

Pine is not that easy to work with. Alder is a good choice if you can get it. You might not want to paint it once you see how nice it is. I have a alder cabinet if I wasn’t so darn poor it would have been made from Cherry. :)
Let me know if you would like to see pic.

-- Aj

View JayT's profile


6273 posts in 2692 days

#16 posted 02-05-2018 02:16 PM

Woody, I’m also in central Kansas. There are sawyers around that occasionally have poplar available. I can also usually find soft maple, which is excellent for painting. Another option would be cottonwood, if it is properly dried. It’s a bit softer than the other two, but still much better than using a softwood like pine.

Not sure where you have been buying lumber (Schmucker’s maybe?) but if you aren’t having much luck finding something, let me know and I might be able to throw you some leads.

-- - In theory, there is no difference between theory and practice. In practice, there is.

View Woodyvolt's profile


12 posts in 642 days

#17 posted 02-06-2018 04:51 PM

I’m fairly new to doing forums and am very pleased with the helpful responses to my woodworking question.

Thanks again,


View Aj2's profile


2430 posts in 2279 days

#18 posted 02-06-2018 06:58 PM

These pieces are made from Superior Alder because it’s mostly clear without knots.. But if you don’t mind knots its very affordable. Alder is sometimes called poor mans cherry.:)

Good luck with your build

-- Aj

View splintergroup's profile


2827 posts in 1703 days

#19 posted 02-06-2018 10:21 PM

Alder can be made to look just like cherry (and other woods), but ‘round here it costs more then cherry!

I’d go with poplar, very stable wood, paints well and is inexpensive (buy it from a hardwood yard and not a big box store)!

Last time I bought some it was $2.20/bf for 4/4 s2s.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics