LumberJocks

All Replies on Veneer glue

  • Advertise with us
View sunadmn's profile

Veneer glue

by sunadmn
posted 02-03-2018 04:57 PM


5 replies so far

View Loren's profile

Loren

10477 posts in 4007 days


#1 posted 02-03-2018 05:42 PM

Plastic resin glue would be a good choice.

You may want to consider paper backed
veneer and contact cement.

View LesB's profile

LesB

2075 posts in 3802 days


#2 posted 02-03-2018 07:17 PM

Unless you have some experience with using natural veneer I would stay with the commercial veneers with a backing and use spray on contact cement. Just be careful because once the two parts touch there is no separating them. Do not use ordinary wood glue or hide glue.

Plastic resin will work but it can be hard to work with if you haven’t used it before and in certain circumstances it can release Formaldehyde and requires good ventilation. Because it is water proof it is commonly used in boat building and making plywood. Here is some good info on it. https://www.christinedemerchant.com/adhesive-glue-urea-formaldehyde.html

My question is have you priced real teak? Amazon shows it at $140 for a 4×8’ sheet. That may change your mind.

-- Les B, Oregon

View Tony_S's profile

Tony_S

965 posts in 3442 days


#3 posted 02-03-2018 07:43 PM

Why not build it out of Teak plywood?

-- It is the mark of an educated mind to be able to entertain a thought without accepting it. Aristotle

View shipwright's profile

shipwright

8287 posts in 3157 days


#4 posted 02-04-2018 01:10 AM

+1 Tony. If you aren’t experienced with veneering, teak plywood is your best bet.
If you are going to veneer, hide glue or plastic resin are the best.
Hide glue requires less clamping pressure (none if you learn to hammer veneer) and is reversible. Plastic resin glue is good but requires lots of pressure and you can’t fix mistakes.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/

View sunadmn's profile

sunadmn

2 posts in 472 days


#5 posted 02-08-2018 04:12 AM

Thanks all for the advice and quick reply.

I’m starting to lean more towards getting a veneered plywood as I don’t want to mess up a project of this scope and have the wife on my case about it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com