LumberJocks

All Replies on Small gouge on cabinet face frame need to repair

  • Advertise with us
View cajunworkshop's profile

Small gouge on cabinet face frame need to repair

by cajunworkshop
posted 02-03-2018 12:56 PM


10 replies so far

View mrg's profile

mrg

860 posts in 3363 days


#1 posted 02-03-2018 01:26 PM

How good are you with a chisel? I would either remove the chunk by cutting the section out. Grafting back in. If you are going to paint the base, bondo or water putty sand smooth and paint.

-- mrg

View bondogaposis's profile

bondogaposis

5371 posts in 2714 days


#2 posted 02-03-2018 01:43 PM

Pry it open and get some glue in there and clamp it closed. You may have to carve a splinter of wood to make a glue applicator that will fit in the crack.

-- Bondo Gaposis

View shipwright's profile

shipwright

8293 posts in 3161 days


#3 posted 02-03-2018 01:48 PM

Pry it up (carefully) and apply a little glue with a thin bit of wood like veneer or a shaving. If it breaks right off, so much the better because there is no better fit than a clean break. You are right to try to fix this even though it doesn’t matter much. It can be a good learning experience.
Try this before you go cutting anything away. This should make an invisible repair and will be something you can use on future pieces where they won’t be painted and where they will show.

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/

View shipwright's profile

shipwright

8293 posts in 3161 days


#4 posted 02-03-2018 01:50 PM

Simultaneous typing Bondo? :-)

-- Paul M ..............the early bird may get the worm but it’s the second mouse that gets the cheese! http://thecanadianschooloffrenchmarquetry.com/

View dhazelton's profile

dhazelton

2837 posts in 2660 days


#5 posted 02-03-2018 03:48 PM

If it’s where that knot appears to be the wood may be under tension there and gluing and clamping may not hold and breaking it clean might not result in tightly mated surfaces. Try it, but be prepared to use filler.

View MT_Stringer's profile

MT_Stringer

3183 posts in 3594 days


#6 posted 02-03-2018 05:14 PM

I second the idea of Bondo if the damaged piece breaks off. Repair it just like a dent in a car. It sands smooth. Then paint it.

Had to repair a template I boogered up.

-- Handcrafted by Mike Henderson - Channelview, Texas

View cajunworkshop's profile

cajunworkshop

64 posts in 1358 days


#7 posted 02-03-2018 06:30 PM

Great ideas. Going to try the bondo. Is there a certain type for wood and does Woodcraft carry it.
The face frame is poplar so I am painting it. No knots in that spot. User error when I was driving a screw!

-- Cajun Workshop Greenville, SC

View dhazelton's profile

dhazelton

2837 posts in 2660 days


#8 posted 02-04-2018 01:58 AM

Regular autobody filler from the home center will do it.

View LesB's profile

LesB

2075 posts in 3806 days


#9 posted 02-04-2018 07:58 PM

Being a fan of medium or thick super glue CA for things like this I would suggest trying it. The medium and thick varieties set up slowly (5 to 15 minutes) which allows it to seep into cracks like that. Just keep adding more until the crack absorbs no more, clamp if necessary and then let it cure (or spray with an accelerator). On finer cracks use an application of the thin version of the glue followed immediately with the medium. For what ever reason the thin stuff makes the medium flow into the better. That method works especially well if the crack or void needs some filler like sawdust…..pack the sawdust in dry, wet with the thin glue and then immediately the medium.

-- Les B, Oregon

View Steve's profile

Steve

1225 posts in 946 days


#10 posted 02-04-2018 08:05 PM

you can get the bondo at Home depot or lowes

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com