LumberJocks

All Replies on timber framing with pegs question - peg sizes

  • Advertise with us
View metroplexchl's profile

timber framing with pegs question - peg sizes

by metroplexchl
posted 01-31-2018 03:44 AM


7 replies so far

View metroplexchl's profile

metroplexchl

85 posts in 844 days


#1 posted 01-31-2018 01:36 PM

I saw Wranglerstar on youtube say that he made the peg smaller than the hole? That doesn’t seem right, but I can’t find any info on it. Just a lot of videos and explanations of people putting the peg in the hole…..but never mentioning the peg vs hole size relationship.

-- What ever you do, be good at it. -Abe Lincoln

View tomsteve's profile

tomsteve

976 posts in 1759 days


#2 posted 01-31-2018 01:45 PM

id saw get some scraps and test. seems that if the beams werent thoroughly dried to a low MC, the beams would shrink around the pegs locking them in pretty good.

View Robert's profile

Robert

3555 posts in 2020 days


#3 posted 01-31-2018 03:34 PM

If you’re doing draw bores you’ll use tapered pegs so it doesn’t matter that much.

-- Everything is a prototype thats why its one of a kind!!

View Harryn's profile

Harryn

82 posts in 3127 days


#4 posted 01-31-2018 04:29 PM

1” pegs seem to be the norm on our old Wisconsin barns. Many were made with an octagon shape and then Slightly tapered with an axe.

View metroplexchl's profile

metroplexchl

85 posts in 844 days


#5 posted 01-31-2018 06:53 PM

Great info. I will use tapered pegs as I’m draw boring the beams. Sorry I should’ve been more clear.

If I have a 1” hole, what diameter peg should I use? Some say 1” peg goes in 1” hole. Some say 1 1/16” peg for 1” hole. Others say 15/16” peg for 1” hole.

Im using already dried white oak beams, so there will be no shrinkage on the beams.

-- What ever you do, be good at it. -Abe Lincoln

View HerbC's profile

HerbC

1801 posts in 3399 days


#6 posted 01-31-2018 09:44 PM

From the Timber Framing forum at the Forestry Forum:

“Pegs should be one half the tenon thickness. So a 2” tenon should have a 1” peg, and a 1 1/2” tenon should have a 3/4” peg.
Now sometimes a 1” peg will take away too much wood and therefore a smaller peg may need to be used as long as it’s strength is high enough as to not fail during it’s load carrying capacity.”

If you haven’t been there before, the Forestry Forum is a great place with lots of good information.

Herb

-- Herb, Florida - Here's why I close most messages with "Be Careful!" http://lumberjocks.com/HerbC/blog/17090

View metroplexchl's profile

metroplexchl

85 posts in 844 days


#7 posted 01-31-2018 11:59 PM



From the Timber Framing forum at the Forestry Forum:

“Pegs should be one half the tenon thickness. So a 2” tenon should have a 1” peg, and a 1 1/2” tenon should have a 3/4” peg.
Now sometimes a 1” peg will take away too much wood and therefore a smaller peg may need to be used as long as it s strength is high enough as to not fail during it s load carrying capacity.”

If you haven t been there before, the Forestry Forum is a great place with lots of good information.

Herb

- HerbC

Great info! Thank you, sir. I have already tried to register with the Forestry Forum, but they really scrutinize the requests and haven’t gotten back yet. I hope I make it!

However, my question is about the relationship between the diameter of the peg and the diameter of the hole it goes in. So, if I have a 3/4” peg, what size hole should I drill in the mortise and tenon?

-- What ever you do, be good at it. -Abe Lincoln

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com