All Replies on Grizzly table saw purchase help

  • Advertise with us
View Chadookydo's profile

Grizzly table saw purchase help

by Chadookydo
posted 01-30-2018 01:47 PM

4 replies so far

View knotscott's profile


8386 posts in 4258 days

#1 posted 01-30-2018 02:15 PM

IMHO the G1023RL represents excellent value in a good lifetime saw that will be capable of anything you throw at, and will be a pleasure to use for years to come, so I think you’re on the right track to upgrade past the hybrid to a full blown cabinet saw. Whatever configuration you want from that is personal preference.

I’ve always built my router table extensions, but buying one is certainly an option if you want. The G1023RLW doesn’t add much cost for what you get. You can extend the rip capacity pretty easily.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View Kelster58's profile


759 posts in 1422 days

#2 posted 01-31-2018 02:05 AM

I have the Grizzly 1023RLWX. Got it about a year and three months ago. I love the saw. I use the router extension often. I only keep round over bits in the router usually 1/4”. I got a shaper at the same time and I highly recommend that as well. For the money I think this saw is an excellent value. I cut a lot of dado, rabbet, and groove joints with my dado stack. The saw doesn’t miss a beat. I would buy it again. Like you rip capacity isn’t a big deal. My shop isn’t that big anyway. As you describe I use the saw and outfeed table for work/assembly and I like the router wing for that too. I took some of the internal dust collection crap off the saw so I could get my dado stack on and off easier. It also jammed up with wood chips. That WAS the only issue I had. Be sure to get the tailgate delivery and track the shipment often…......Good luck

-- K. Stone “Tell me and I forget, teach me and I may remember, involve me and I learn.” ― Benjamin Franklin

View HorizontalMike's profile


7898 posts in 3796 days

#3 posted 01-31-2018 12:41 PM

Other than choosing the G0690, I did exactly what you are contemplating with regards to a router extension. to the TS:

And I added this router extension, and it comes with an extension leg for the TS:
Grizzly T10222 - 20in x 27in Router Extension Table for Table Saw

-- HorizontalMike -- "Woodpeckers understand..."

View Carloz's profile


1147 posts in 1474 days

#4 posted 01-31-2018 12:50 PM

Good choice with going up from G0771. I was not that smart I bought it and I felt I overgrew it in few month.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics