All Replies on Help with Fixing an Epoxy Issue

  • Advertise with us
View SammyT's profile

Help with Fixing an Epoxy Issue

by SammyT
posted 01-29-2018 06:56 AM

7 replies so far

View TheFridge's profile


10861 posts in 2365 days

#1 posted 01-29-2018 06:57 AM

Shouldn’t be that noticeable considering.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View jerryminer's profile


960 posts in 2320 days

#2 posted 01-29-2018 07:45 AM

A tiny drop of epoxy applied with a toothpick should take care of it.

-- Jerry, making sawdust professionally since 1976

View SammyT's profile


23 posts in 1679 days

#3 posted 01-29-2018 07:46 AM

I guess I’ll just try it out. Thanks. And I laughed out loud when I saw your pics of your workbench @TheFridge. Great job on that by the way. And I should totally see if there are any local cabinet stores in town for off cuts. Never heard of any companies but I also never bought any cabinets either.

View MrUnix's profile


8231 posts in 3078 days

#4 posted 01-29-2018 12:37 PM

You can epoxy on top of epoxy, but you should rough it up a bit and clean it first (water, mineral spirits, alcohol, etc..).


-- Brad in FL - In Dog I trust... everything else is questionable

View Rich's profile


5960 posts in 1468 days

#5 posted 01-29-2018 05:16 PM

I work extensively in mesquite, which requires sometimes huge quantities of epoxy to fill voids, strengthen cracks, etc. I always do multiple pours to gradually fill the voids. When I get bubbles in the surface after planing, I find it’s easier to use a hard fill product like black Mohawk Plane Stick to fill them. After applying finish, its impossible to tell what’s epoxy and what’s fill.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View LesB's profile


2620 posts in 4322 days

#6 posted 01-30-2018 12:50 AM

A thick CA glue should work too and set up faster.

-- Les B, Oregon

View SammyT's profile


23 posts in 1679 days

#7 posted 01-30-2018 06:51 AM

Thanks everyone for your suggestions. All very helpful. I’ll have to look into the Mohawk Plane Sticker, never heard of it before. So, thank you for that Rich.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics