LumberJocks

All Replies on Hand Tool Forensics #1 - We Have A Winner!

  • Advertise with us
View Ron Aylor's profile

Hand Tool Forensics #1 - We Have A Winner!

by Ron Aylor
posted 01-27-2018 07:48 PM


26 replies so far

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1053 posts in 1430 days


#1 posted 01-27-2018 08:00 PM

How about cutting a curve on board edge with a chisel

-- "Tying shoelaces was way harder than learning to Whistle"

View TheFridge's profile

TheFridge

10858 posts in 1850 days


#2 posted 01-27-2018 08:08 PM

Mortise with chisel? What do we win. Alder? :)

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Oldtool's profile

Oldtool

2766 posts in 2554 days


#3 posted 01-27-2018 08:19 PM

I loose, no idea.

-- "I am a firm believer in the people. If given the truth, they can be depended upon to meet any national crisis. The point is to bring them the real facts." - Abraham Lincoln

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#4 posted 01-27-2018 08:27 PM



How about cutting a curve on board edge with a chisel

- TheTurtleCarpenter

Close, but no.

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#5 posted 01-27-2018 08:30 PM



Mortise with chisel? What do we win. Alder? :)

- TheFridge

Very close, but no. Alder is too valuable to be the prize in some silly contest … shame on you!

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#6 posted 01-27-2018 08:31 PM



I loose, no idea.

- Oldtool

Now, Tom … really?

View theoldfart's profile

theoldfart

10622 posts in 2815 days


#7 posted 01-27-2018 08:37 PM

Foot powered mortising machine.

-- "With every tool obtained, there is another that is needed" DonW ( Kevin )

View Ripper70's profile

Ripper70

1263 posts in 1272 days


#8 posted 01-27-2018 09:01 PM


 
What was I doing, and with what?
 

- Ron Aylor


You were cutting the tops of tiny Trojan Warrior helmets with a well sharpened kopis.

-- "You know, I'm such a great driver, it's incomprehensible that they took my license away." --Vince Ricardo

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#9 posted 01-27-2018 09:21 PM



Foot powered mortising machine.

- theoldfart

Sorry Kevin, no.

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#10 posted 01-27-2018 09:22 PM


 
What was I doing, and with what?
 

- Ron Aylor

You were cutting the tops of tiny Trojan Warrior helmets with a well sharpened kopis.

- Ripper70

DING, DING, DING ….. no. LOL!

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1053 posts in 1430 days


#11 posted 01-27-2018 09:23 PM

Maybe it was a hatchet that was used, those chips are too thick and short for a drawknife.

-- "Tying shoelaces was way harder than learning to Whistle"

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#12 posted 01-27-2018 09:27 PM



Maybe it was a hatchet that was used, those chips are too thick and short for a drawknife.

- TheTurtleCarpenter

No hatchet. The chips are approximately 3/16” thick and 9/32” high.

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1053 posts in 1430 days


#13 posted 01-27-2018 09:44 PM

I guess I was thinking they were larger Ron, nice clue. How about chopping the waste on an end grain rabbet with a chisel

-- "Tying shoelaces was way harder than learning to Whistle"

View JRsgarage's profile

JRsgarage

363 posts in 873 days


#14 posted 01-27-2018 09:48 PM

cutting a dado

-- “Facts don't care about your feelings.” ..., Ben Shapiro

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#15 posted 01-27-2018 09:54 PM



I guess I was thinking they were larger Ron, nice clue. How about chopping the waste on an end grain rabbet with a chisel

- TheTurtleCarpenter

Gettin’ warmer!

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#16 posted 01-27-2018 09:57 PM



cutting a dado

- JRsgarage

Hmmm … check the definition of dado.

View Kelster58's profile

Kelster58

749 posts in 904 days


#17 posted 01-27-2018 10:14 PM

I was going to say that you are making a relief carving of some type.

After that last comment I’m going with you are cutting a groove

-- K. Stone “Tell me and I forget, teach me and I may remember, involve me and I learn.” ― Benjamin Franklin

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#18 posted 01-27-2018 10:21 PM


I was going to say that you are making a relief carving of some type.

After that last comment I m going with you are cutting a groove

- Kelster58

DING, DING, DING … yes!
 
I was cutting a groove in the edge of a piece of walnut with a mortise chisel.
 

 

View Kelster58's profile

Kelster58

749 posts in 904 days


#19 posted 01-27-2018 10:33 PM

DING, DING, DING … yes!
 
I was cutting a groove in the edge of a piece of walnut with a mortise chisel.

- Ron Aylor

Without JRSGARAGE and the others I would have never been able to make a guess…........

-- K. Stone “Tell me and I forget, teach me and I may remember, involve me and I learn.” ― Benjamin Franklin

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#20 posted 01-27-2018 10:45 PM



DING, DING, DING … yes!
 
I was cutting a groove in the edge of a piece of walnut with a mortise chisel.

- Ron Aylor

Without JRSGARAGE and the others I would have never been able to make a guess…........

- Kelster58

Congratulations nonetheless! Perhaps you’ll use this as extra credit on an exam down the road (???)

View Blackberry's profile

Blackberry

135 posts in 1517 days


#21 posted 01-27-2018 11:58 PM

Cutting a groove with a chisel….darn that’s typical…I’m a day late and dollar short.

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#22 posted 01-28-2018 12:05 AM



Cutting a groove with a chisel….darn that’s typical…I’m a day late and dollar short.

- Blackberry

There’s always next time. :-)

View TheFridge's profile

TheFridge

10858 posts in 1850 days


#23 posted 01-28-2018 12:14 AM

Firmer or mortise chisel?

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#24 posted 01-28-2018 12:33 AM



Firmer or mortise chisel?

- TheFridge

1/4” mortise chisel.

View Alex Lane's profile

Alex Lane

549 posts in 4254 days


#25 posted 01-28-2018 01:51 AM

This was really fun! Looking forward to more :-)

-- Lane Custom Guitars and Basses

View Ron Aylor's profile

Ron Aylor

2649 posts in 1011 days


#26 posted 01-28-2018 01:58 AM



This was really fun! Looking forward to more :-)

- Alex Lane

Thanks, Alex … I’ll do my best!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com