LumberJocks

All Replies on SOSS Hinge Query

  • Advertise with us
View Richard Lee's profile

SOSS Hinge Query

by Richard Lee
posted 01-17-2018 01:30 AM


4 replies so far

View Andre's profile

Andre

2829 posts in 2345 days


#1 posted 01-17-2018 01:40 AM

I set them almost flush when I used them. The chamfer will still be visible?

-- Lifting one end of the plank.

View Richard Lee's profile

Richard Lee

256 posts in 1314 days


#2 posted 01-17-2018 01:47 AM

What Chamfer ?

View jerryminer's profile

jerryminer

960 posts in 1980 days


#3 posted 01-17-2018 05:40 AM

There may be a small gap even when the hinges are set flush. Look at the hinge itself —out of the door. When the hinge faces are parallel, is there a gap? that gap will exist between the parts when the hinge is installed flush. To eliminate the gap, set the hinge deeper.

I find it is easier to cut the mortise a little “extra” deep, and shim with cereal-box cardboard if needed—- easier than re-routing the mortise.

The weight of the door can also be a factor—requiring the top hinge to be set deeper than the bottom hinge.

Soss hinges are fussy. I mostly use Tectus adjustable hinges now.

edit: another thing that may be a factor: if the screws are not driven straight, the screw heads may be binding on each other.

-- Jerry, making sawdust professionally since 1976

View Andre's profile

Andre

2829 posts in 2345 days


#4 posted 01-17-2018 07:02 AM



What Chamfer ?

- Richard Lee

The Chamfer on the door frame/edge.

-- Lifting one end of the plank.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com