LumberJocks

All Replies on Shelix Cutterhead

  • Advertise with us
View Josbo's profile

Shelix Cutterhead

by Josbo
posted 01-12-2018 09:24 PM


5 replies so far

View cabmaker's profile

cabmaker

1745 posts in 3166 days


#1 posted 01-12-2018 09:28 PM

Absolutly incorrect position

View John Smith's profile

John Smith

1793 posts in 520 days


#2 posted 01-12-2018 09:30 PM

I would call the people that made it @ (855) 699-6635
because the heads they show on their website look to be all in alignment – not skewed.

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View AZWoody's profile

AZWoody

1440 posts in 1581 days


#3 posted 01-12-2018 10:30 PM

It’s normal. It is for cutting a rabbet if you use the ledge.

View Tony_S's profile (online now)

Tony_S

965 posts in 3440 days


#4 posted 01-13-2018 12:36 AM



It s normal. It is for cutting a rabbet if you use the ledge.
- AZWoody

X2

-- It is the mark of an educated mind to be able to entertain a thought without accepting it. Aristotle

View Josbo's profile

Josbo

3 posts in 491 days


#5 posted 01-13-2018 12:37 AM

AZ Woody, that is the exact answer that I got from the folks at Byrdtools. I’m going to go with that, install the cutterhead in my jointer, then run a few test pieces.

Really appreciate the quick feedback from everyone, Thank You!!!

Jeff

-- The Wood doesn't talk back.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com