LumberJocks

All Replies on Top of Table Saw Dust Collection - Advice Needed

  • Advertise with us
View GraceAndDrew's profile

Top of Table Saw Dust Collection - Advice Needed

by GraceAndDrew
posted 01-12-2018 08:47 PM


7 replies so far

View Gilley23's profile

Gilley23

489 posts in 1238 days


#1 posted 01-12-2018 09:00 PM

How about an articulating arm attached to the ceiling above that holds the suction hose? You could position it however you’d like for either the saw or router.

View nelsonohio's profile

nelsonohio

2 posts in 98 days


#2 posted 06-22-2020 10:27 PM

I would like to build something just like that, an articulating arm attached to the ceiling above that holds the suction hose and the dust hood just above the table saw. Are there threads showing how others have done it? Would love to get some ideas.

Thanks.

View Splinterlicker's profile

Splinterlicker

14 posts in 101 days


#3 posted 06-23-2020 02:02 AM

View Fred Hargis's profile

Fred Hargis

6430 posts in 3349 days


#4 posted 06-23-2020 10:48 AM

The Badger Pond overarm guard is what you are looking for. I actually built one of these eons ago, and with my partucular layout could not figure out how to mount it to the ceiling. I wound up giiving it away. But it’s a well thought out DIY solution. Bear in mind this won’t do what you want for those edge cuts. You could make a side shield that fastens with velcro to attach. I had this on my (used) Excalibur basket. It works, but I declared it it to be too much of a pain and quit using it.

-- Our village hasn't lost it's idiot, he was elected to congress.

View nelsonohio's profile

nelsonohio

2 posts in 98 days


#5 posted 06-23-2020 05:31 PM

Thanks for the info. This is helpful for me to design something for my setup. Are there more pics or info on different articulating arm designs? I would like mine to be flexible as my table saw will be more mobile and will not always be at the exact same spot when I put it down, within 6” radius, but not exactly the same spot.

View Fred Hargis's profile

Fred Hargis

6430 posts in 3349 days


#6 posted 06-24-2020 12:15 PM

What you refer to is one of the problems I didn’t want to solve. I’m sure there are pics out there, but I wouldn’t know where. One thing I could picture is an “L” arm hanging from the ceiling, in a manner that it swivels. Then on the lower leg of the “L”, a bracket that slides back and forth to hold the basket hardware. That should allow side to side and back and forth adjustment.

-- Our village hasn't lost it's idiot, he was elected to congress.

View farmfromkansas's profile

farmfromkansas

220 posts in 470 days


#7 posted 06-24-2020 02:35 PM

I have a Shark guard on my unisaw, but it is not portable. Works good though.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com