All Replies on Affordable low angle block plane

  • Advertise with us
View swdshfsh's profile

Affordable low angle block plane

by swdshfsh
posted 01-11-2018 04:20 PM

19 replies so far

View buckbuster31's profile


256 posts in 1397 days

#1 posted 01-11-2018 04:29 PM

I got an old craftsman from time tested tools. Its incredible. He sharpened it and flattened and completely restored. I paid 52 dollars, and I would put it against any of the 100 dollar plus ones. It is quickly becoming a shop favorite for me.

View bondogaposis's profile


5872 posts in 3233 days

#2 posted 01-11-2018 04:34 PM

Get an old Stanley 60 1/2 on ebay. Don’t buy a new one, they are junk. Make sure you find a vintage one.

-- Bondo Gaposis

View waho6o9's profile


8946 posts in 3459 days

#3 posted 01-11-2018 04:34 PM

Welcome to LumberJocks swdshfsh!

No buyers remorse from time tested tools.

View Dustin's profile


707 posts in 1622 days

#4 posted 01-11-2018 06:06 PM

Another vote for paying Don a visit at It’s where I got my block plane, and it arrived ready to use. It has since become indispensible in my shop.

-- "Ladies, if your husband says he'll get to it, he'll get to it. No need to remind him about it every 6 months."

View swdshfsh's profile


3 posts in 1017 days

#5 posted 01-11-2018 06:55 PM

Hey guys, Thanks so much for the info! Does anyone else have any suggestions on a model?

View bbasiaga's profile


1243 posts in 2877 days

#6 posted 01-11-2018 08:51 PM

I have a vintage no 65 that I like never than the no 60.5. My hands are larger and it is more comfortable to me, but sometimes a smaller plane is nicer too.

You can find equivalents by Miller’s falls too.

For new, the wood river planes I have seen look quite nice. And they do a hand tool sale a couple times per year so you could get a decent price on it.


-- Part of engineering is to know when to put your calculator down and pick up your tools.

View OpensideFlanker's profile


14 posts in 1190 days

#7 posted 01-12-2018 09:03 PM

I would echo recommendations for the Stankly 65 or 65 ½ (latter for larger hands) for the truly low angle (12 degrees), although you lose the lateral adjustment lever. In truth, for most applications, the 9 ½ or 18 Stanleys will suit fine and you get the adjusting lever, at the cost of 8 degrees higher pitch. You can find these easily on Ebay and they are very easy to fettle. Just make sure there are no cracks. Since they are bevel up, you can fool with the iron angle if like (for wonky grain or endgrain). I personally love the lever cap models (18 and 65) and the adjustable mouths. I would strongly avoid dropping them, however, as they will fracture at the mouth.

View Smitty_Cabinetshop's profile


16938 posts in 3500 days

#8 posted 01-12-2018 11:59 PM

Flanker speaks truth. A newer vintage No. 18 is currently my fave…

-- Don't anthropomorphize your handplanes. They hate it when you do that. - OldTools Archive -

View bandit571's profile


26722 posts in 3565 days

#9 posted 01-13-2018 12:38 AM

Careful…these are very addicting..

And these are just the “fancy” ones….

-- A Planer? I'M the planer, this is what I use

View Don W's profile

Don W

19726 posts in 3449 days

#10 posted 01-16-2018 12:46 PM

Low angle block planes don’t hang around very long. I now know where the sudden rash of low angle request came from. I’ve got a few nice#18s but no low angles right now.

The early craftsman planes are fantastic users. Once tuned they work as well as anything.

-- - Collecting is an investment in the past, and the future.

View OSU55's profile


2658 posts in 2871 days

#11 posted 01-16-2018 01:05 PM

I have a new (10 yrs old) Stanley 12-960, current 60-1/2, that works great. Have to know how to tune up a plane, but for about $40 its a good value.

View BurlyBob's profile


7945 posts in 3147 days

#12 posted 01-16-2018 06:10 PM

Totally love my 60 1/2 and can’t imagine not having it my shop. Of all my planes it gets the most use.

View gtrgeo's profile


134 posts in 1312 days

#13 posted 01-16-2018 06:22 PM

bandit571, I have this same Millers-Falls low angle block plane and like everything about it except for the lack of adjustable mouth. It seems prone to tear-out if I am not extremely careful. I am curious on your experience with this plane or any tips you can provide.

Thanks, George

View dhazelton's profile


2839 posts in 3178 days

#14 posted 01-16-2018 06:35 PM

A new Stanley is only $25-30 and is fine for what you want to do. I’ve paid as little as two bucks for one at a yard sale.

View bandit571's profile


26722 posts in 3565 days

#15 posted 01-16-2018 06:35 PM

I tend to use that 60-1/2 beside it….The 1455, is good for knocking down sharp corners and the like. They all just need to be as sharp as you can get them. That 1455 came with it’s original box, BTW.

-- A Planer? I'M the planer, this is what I use

View JohnChung's profile


421 posts in 2956 days

#16 posted 01-17-2018 03:44 AM

I made this review. Falls within your budget.

View alittleoff's profile


548 posts in 2158 days

#17 posted 01-17-2018 05:19 AM

I don’t know why everyone is so down on the Stanley planes. I’ve got all the new sweetheart planes they came out with a couple years ago and have no problems with them at all. I’ve used them all right out of the box and they worked pretty darn good.

View swdshfsh's profile


3 posts in 1017 days

#18 posted 01-22-2018 12:51 PM

Thanks for all the info guys!! I remembered there was a wooden box that had some planes in it from my grandfather’s house, when i was home last i checked it out and found what looks like a 60 1/2, i’ll post pictures in a little bit to make sure, exciting stuff!

View HorizontalMike's profile


7898 posts in 3796 days

#19 posted 01-22-2018 01:41 PM

While I have a couple of Craftsman and early Sargent block planes, my most used is a newer WoodRiver Low Angle Block Plane.
IMO, the thicker blade really makes this plane shine. Well worth the $99 price at the local WC.

-- HorizontalMike -- "Woodpeckers understand..."

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics