All Replies on Story stick info?

  • Advertise with us
View Andybb's profile

Story stick info?

by Andybb
posted 01-10-2018 05:11 PM

6 replies so far

View waho6o9's profile


8946 posts in 3460 days

#1 posted 01-10-2018 05:23 PM

Bob Rozaieski Fine Woodworking
Published on Jan 29, 2014


I like using them, thanks Bob Rozaieski!

View LittleShaver's profile


695 posts in 1502 days

#2 posted 01-10-2018 06:10 PM

It’s about the only thing I use any more. Any old scrap can work as long as you can make clear marks on it. Set a base reference point (end of sick or a line) and set all of your key project dimensions off the reference. Label accordingly.

A single stick can have multiple reference points if needed and don’t forget that you can use the flip side too.

Your dimensions can come from a drawing, sketch, intuition, or direct reference off your stock or project.

I’m a hobbyist, but my results improved dramatically when I quit using tapes and rules to measure things.

-- Sawdust Maker

View Andybb's profile


2884 posts in 1486 days

#3 posted 01-10-2018 06:59 PM

Excellent. Thanks to you both.

-- Andy - Seattle USA

View TheFridge's profile


10861 posts in 2369 days

#4 posted 01-10-2018 07:17 PM

Hell yeah. I use one on anything with multiple dados or drawers. Inside/ outside dimensions of dovetailed boxes. All kind of good stuff. I use the and a veritas bar gauge.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View James Frederick's profile

James Frederick

240 posts in 4603 days

#5 posted 01-10-2018 07:20 PM

I just made 3 book cases and the story stick made layout nearly foolproof, nearly. I highly recommend using one, my neighbor wants me to build a couple bookcases for him, glad I kept the Stick.

-- Change begins somewhere, let it begin with me.

View Dan P's profile

Dan P

755 posts in 2775 days

#6 posted 01-10-2018 08:20 PM

This is an example of cutting hinge mortises in small boxes. First make a sacrificial piece (story stick)the precise dimensions of the back of your box. Pencil in on one side only, an outline of where you want your hinge to fit. Cut it out with scroll saw (or whatever). Now set up your router guides using your story stick.

I have found through trial and error that before cutting in to the actual box, route the story stick hole to see how close you are to what you want. Then cut your box and flip your story stick and reset your router guides for that side. Then route the other side of your story stick. This way you can make any adjustments on the story stick and not the actual box.

see example below.

-- Daniel P

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics