LumberJocks

All Replies on Used SawStop value

  • Advertise with us
View jaygolf's profile

Used SawStop value

by jaygolf
posted 01-09-2018 01:09 PM


17 replies so far

View a1Jim's profile

a1Jim

117618 posts in 3941 days


#1 posted 01-09-2018 02:20 PM

what model is it?

View johnstoneb's profile

johnstoneb

3100 posts in 2536 days


#2 posted 01-09-2018 02:24 PM

That’s not far off new price.

-- Bruce, Boise, ID

View jaygolf's profile

jaygolf

4 posts in 618 days


#3 posted 01-09-2018 02:36 PM

It is a professional with a 52” rip capacity

View jaygolf's profile

jaygolf

4 posts in 618 days


#4 posted 01-09-2018 03:01 PM

What would be a fair price to offer?

View GR8HUNTER's profile

GR8HUNTER

5971 posts in 1076 days


#5 posted 01-09-2018 03:30 PM

HALF OFF NEW :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View bigblockyeti's profile

bigblockyeti

5692 posts in 2084 days


#6 posted 01-09-2018 03:36 PM

$1500 max, if it’s perfect.

-- "Lack of effort will result in failure with amazing predictability" - Me

View moke's profile

moke

1367 posts in 3140 days


#7 posted 01-09-2018 03:48 PM

Sounds like it may be an Industrial….not sure professionals have been out 10 years. It was prob 5k to 5.5k new so I would offer 2500 if it was in good shape. Does it have the wheels?

That is a nice saw. I have a PCS ( Professional Cabinet Saw ), and looked at an ICS ( Industrial Cabinet Saw-top model ) a fellow wood worker had before I bought mine….Mine is 3 hp and I think all ICS were 5 hp…there is a difference in that power….not a ton, but what I would call a noticeable difference.

I owned a Camera store for 30 years, and dealing with folks on there personal cameras some tend to remember what they paid for it and want close to that….I still have a studio in the same location, and folks still come in and want very unrealistic amounts for their “treasure”. I have heard that used tools are generally 50% of new, but age certainly have to factor into that, and if the model is still current, and it’s shape, too.
Good luck keep us informed what happens.
Just my .02…..

-- Mike

View bbasiaga's profile

bbasiaga

1243 posts in 2359 days


#8 posted 01-09-2018 04:08 PM

Make sure it still uses the new style break. Older saws had a different one. I am not sure if they are compatible. Sawstop would kn ow. Have him send you a picture of it and see what it looks like.

1500 is probably low for this. A 5hp ICS would be closer to 5k I think. There is no 5hp PCS IIRC.

Brian

-- Part of engineering is to know when to put your calculator down and pick up your tools.

View Fred Hargis's profile

Fred Hargis

5507 posts in 2857 days


#9 posted 01-09-2018 07:59 PM

The earliest Sawstops were the ICS models, though they were’nt labeled as such (I think). When the PCS was introduced then the larger saw became the ICS. The PCS does not (and did not) come with a 5 HP motor AFAIK. But my opinion on the price is he’s asking too much.

-- Our village hasn't lost it's idiot, he was elected to congress.

View a1Jim's profile

a1Jim

117618 posts in 3941 days


#10 posted 01-10-2018 03:28 PM

SawStops demand higher used prices than other saws it’s rare to see one for sale in my area, it’s the old supply and demand issue, If it’s an ICS in good condition then $2800-$3200 seems inline

View jaygolf's profile

jaygolf

4 posts in 618 days


#11 posted 01-17-2018 04:01 PM

Update: Model number : CB51230

View yvrdennis's profile

yvrdennis

50 posts in 1441 days


#12 posted 01-17-2018 08:06 PM

I paid 3500 $CDN for an ICS a couple of years ago. This is about $2800 usd at current exchange. I thought I got a pretty good deal. The ICS has a bigger table, which gives you a bit more room in front of the blade. It is also just generally beefier.

You should talk to sawstop and find out what design changes there have been. On mine they redesigned the guard and the dust collection shroud under the table. They have a pretty good deal on the upgrade parts and it’s worth doing imo.

Used sawstops are rare, so I think they are worth more than most used equipment.

View avsmusic1's profile

avsmusic1

398 posts in 1049 days


#13 posted 01-17-2018 10:31 PM

ICS is $4800 new on CPO

SawStops certainly retain their resale in my area but, to me, $3500 seems a little too high. Hard to say for sure though without any pics or additional info, but I’m inclined to agree with a1Jim. I’d think ~3k feels about right assuming nothing huge has been redesigned and it wasn’t used commercially.

View bonesbr549's profile

bonesbr549

1581 posts in 3431 days


#14 posted 01-18-2018 02:39 AM

I’ve had my 5hp ICS for about 3 years now. Memory serves me it was around 4200 when I bought with big rails and table and overarm guard. I’d offer 2500.

I will let you know I looked for used for almost 2 years, they hold their value, so don’t dally to long.

Id get the SN call sawstop and get the details. They can tell you the history good/bad.

Great saw.

-- Sooner or later Liberals run out of other people's money.

View Roy Turbett's profile

Roy Turbett

169 posts in 3943 days


#15 posted 01-19-2018 11:05 PM

I did a nationwide CL search for three months before I found my 10 year old used 5 hp ICS saw 5 hours away. I traded a 3 hp Unisaw and $1,800 for it. Its a much beefier saw than the PCS and he won’t have any trouble getting $3,500 for it.

View alittleoff's profile

alittleoff

541 posts in 1640 days


#16 posted 01-20-2018 02:26 AM

You don’t find used Sawstop saws everyday used, but 3500.00 is to much and I think he’ll have a hard time getting it for the saw. The reason is you can buy a brand new 3hp professonial 52 inch for 3250.00. I would like to have a sawstop and I’m thinking about getting one this summer, but I’d buy a 3hp new saw before paying that much for a used saw and think most people would. If he would come down to around 2800 and the saw was in good shape I’d give it a hard look. They seem to be good saws and most people like theirs, but most of all they have the safety feature.
Gerald

View yvrdennis's profile

yvrdennis

50 posts in 1441 days


#17 posted 01-20-2018 04:29 PM

When I bought my ICS used I thought it was a great deal because I was getting an ICS for less that the cost of a PCS. These are two different saws. Having said that, I agree that $3,500 is a bit rich, I’d probably offer $3,000 like some others have previously stated.


You don t find used Sawstop saws everyday used, but 3500.00 is to much and I think he ll have a hard time getting it for the saw. The reason is you can buy a brand new 3hp professonial 52 inch for 3250.00. I would like to have a sawstop and I m thinking about getting one this summer, but I d buy a 3hp new saw before paying that much for a used saw and think most people would. If he would come down to around 2800 and the saw was in good shape I d give it a hard look. They seem to be good saws and most people like theirs, but most of all they have the safety feature.
Gerald

- alittleoff


Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com