LumberJocks

Reply by Rayne

  • Advertise with us

Posted on Jointing super-thin strips?

View Rayne's profile

Rayne

1216 posts in 2017 days


#1 posted 12-21-2014 05:48 AM

I’ve never tried it, but I would definitely do it this way if I needed thin strips jointed. I’d first cut the thin strips on my table saw, lay out whatever grit sandpaper you need to more than cover the length of the thin strip, use double-sided tape and tape it to something flat and firm (melamine / mdf comes to mind), then slowly sand away 2 to 3 strokes for a finished side. Repeat for the other and it should work out for an even strip. There might be better ways, but that’s just my method I came up with.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com