LumberJocks

Reply by BigNate78

  • Advertise with us

Posted on Bought a used saw.

View BigNate78's profile

BigNate78

10 posts in 2578 days


#1 posted 11-17-2014 03:12 PM

It performs very well. the motor seems to have more power and run with less vibration than the craftsman did even tho they were both rated at 1.5hp. I would like a riving knife for it and it didn’t come with the safety guard…the blade that was in it was shot but it also had a 10” Hitachi that will work for now. The blade height is mush easier to adjust as is the angle. When I release the fence it has a tendency of wanting to come out of the track. Its my first “Real” fence…It has the Unifence on it…any suggestions as to keep it in the rail? l was also wondering if anyone had any suggestions of a good saw blade? The last saw I had I put a masterforce thin kerf blade on it…Not bad…tended to wobble a bit tho and tended to cup boards during a rip. I had a big nasty Skilsaw blade on there but it sucked. I still have a 24tooth skillsaw rip blade….don’t know what to do with it.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com