LumberJocks

Reply by ChefHDAN

  • Advertise with us

Posted on Issues with router table extension and sacrificial fence...

View ChefHDAN's profile

ChefHDAN

1328 posts in 3146 days


#1 posted 06-11-2014 02:34 PM

Matt, were you going from left to right with the board or right to left? Feed direction changes from the bottom of the bit to the top, on my table setup, I would have pushed that left to right with the set up you described, (though my fence has two wings, and I would not have cut the way you described), sounds like you were climb cutting and the trapped force of the tear out against the fence snapped the bit, because you made the full cut in one pass for the dovetail dado.

-- I've decided 1 mistake is really 2 opportunities to learn.. learn how to fix it... and learn how to not repeat it


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com