Reply by FellingStudio

  • Advertise with us

Posted on How to turn an oval

View FellingStudio's profile


93 posts in 2138 days

#1 posted 06-04-2014 11:03 PM

This is not really that hard guys … it can be done with a simple spur drive.

Starting with a square blank, first mark the center of both ends by drawing straight lines corner to corner. Next mark points on one of your diagonals that are an equal distance from the center point. Mount on the lathe on the center points and turn the blank round. Mount on the lathe using one set of your off center points, and cut away half of the remaining wood. Mount on the lathe using the other set of your off center points, and cut away the remaining wood. You now have an oval.

Basically you are turning the wood three times on parallel axes.

-- Jesse Felling -

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics