LumberJocks

Reply by Mark Shymanski

  • Advertise with us

Posted on remove filter from Grizzley dc

View Mark Shymanski's profile

Mark Shymanski

5623 posts in 4251 days


#1 posted 05-31-2014 07:43 PM

The only reason for the bag or filter is to retain the sawdust and finer stuff so it is not re-blown around your shop. If you have a place to blow it to that doesn’t matter if the fines are airborne and the larger dust is in an acceptable place you should be okay with just blowing it through the wall to where ever. As long as your not causing a negative pressure in your shop which can have bad side effects with gas heaters and such, and you don’t mind blowing cooled or heated air out of your shop I’d say go for it. If I lived in a rural area I’d blow my dust outside.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com