LumberJocks

Reply by jdmaher

  • Advertise with us

Posted on Why use a buried blade set on a Table Saw?

View jdmaher's profile

jdmaher

472 posts in 3641 days


#1 posted 05-27-2014 11:37 PM

John,

Let’s use some standard terminology.

When I referred to a tenon, I was referring to “inching up” on the shoulder cut, the “length” of the tenon. The first cut would be at the “end” of the board and subsequent cuts would move toward the final position of the shoulder cut (which I guess you refer to as “inner”).

However, I encourage you to think about the rabbet as a better example to consider to answer the original question “why use a sacrificial fence”. Although I DO use the technique for “inching up” on the tenons, my motivations are not what you might think (confusing in this context; send me a private message if you wish to pursue application of the technique to tenons).

-- Jim Maher, Illinois


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com