LumberJocks

Reply by Tony1212

  • Advertise with us

Posted on Why use a buried blade set on a Table Saw?

View Tony1212's profile

Tony1212

515 posts in 2796 days


#1 posted 05-27-2014 02:31 PM

I’ve always had a question about this as well:

If you want a 3/4” rabbet, why not set up a 1/2” dado stack, make the first cut at the very edge of the board (so you have a rabbet slightly less than 1/2”) then use the regular fence as a stop to sneak up on the 3/4”? This way you don’t need to use a nice, long, straight piece for a sacrificial fence.

I’ve always had problems defining a 2 – 3 foot long by 4 inch piece of straight wood as “sacrificial”.

-- Tony, SW Chicago Suburbs


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com