LumberJocks

Reply by Karson

  • Advertise with us

Posted on Problem: Jointing with router

View Karson's profile

Karson

35223 posts in 5177 days


#1 posted 07-31-2007 02:54 PM

I realize that you are not asking for more tools but I have a jointability I bought it from the inventor and he later sold out to HAWK. But it would not be hard to make something like this. It uses a 2” square tube at the top and Melamine as the cut line surface. There is also some supporting metal at the bottom but it could be made to use a bench or sawhorses as your base. Woodshopdemos also had a demo on using the Jointability.

You cut one board on the left side of the tube and the other board on the right of the tube so that if there is any curve in the tube they are canceled out in both cuts.

They also have a jig which clamps on your Skill Saw to cut off the ragged edges of a board. You set it to leave about 1/8” and then trim that off with the router.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Appomattox Virginia [email protected]


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com