Reply by dbray45

  • Advertise with us

Posted on Need veneering advise please

View dbray45's profile


3406 posts in 3792 days

#1 posted 04-11-2014 11:47 AM

What Jesse and Paul said – but put a piece of cardboard that is the thickness of the saw blade between the drawers as a spacer. Do not run the cardboard all the way to the veneer – leave a 1/4” gap. Doing this gives you the space for the saw blade. Cut down toward the cardboard. Practice this on a mockup a few times first.

Do not disconnect the boxes (remove the cardboard) until the cut is complete or you can splinter the veneer.

-- David in Palm Bay, FL

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics