LumberJocks

Reply by miles125

  • Advertise with us

Posted on Jointer Problem

View miles125's profile

miles125

2180 posts in 4617 days


#1 posted 04-27-2009 03:37 PM

The bottom line is both beds have to be parallel with each other, not neccessarily level. Plus a bubble level has nowhere near the accuracy required to diagnose this. The surest test is a board remaining flat to the outfeed table after its cut by the blades. The factory set shims may indeed need to be tweaked if all height adjustment tweaking fails to work.

-- "The way to make a small fortune in woodworking- start with a large one"


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com