Reply by BJODay

  • Advertise with us

Posted on At my wits end....

View BJODay's profile


528 posts in 3002 days

#1 posted 03-03-2014 02:16 AM

Slowly loosen the nut on the spring’s outer cover. When the tension on the nut is loosened the spring will unwind, (while still under the metal cover). Once the tension of the spring is released you can remove the spring cover completely. Then you will be able to remove the 3 prong handle from the other side. It’s been a while since I did it but I think the spindle will then drop straight down.

Caution: the spring is a coil spring and if you just pull off the cover it could unwind rapidly and cut your hand.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics