LumberJocks

Reply by toddbeaulieu

  • Advertise with us

Posted on Incra Poisitioner - why set the scale to 0 for scoring pass when the bit protrudes?

View toddbeaulieu's profile

toddbeaulieu

851 posts in 4062 days


#1 posted 12-23-2013 12:07 PM

Joe, I wanted to update you. I was able to make my first set of half blind drawer boxes the other day and I must say that I thoroughly enjoyed the process with the Incra over the dovetail jig. What a difference!

Now I understand the beveled rabbet for half blinds and the described approach is perfectly adequate.

Do you have any insight over recommended stock WIDTH? With my dovetail jig it’s inch plus 1/4” for the larger bit and 1/2 inch plus 1/8” for the smaller bit.

I ask because I pretty much randomly chose a template that worked great for the first drawer size but was incompatible with the second size. I struggled for a good 15 minutes before settling on another pattern for that. I’d like to get a better understanding and approach for selecting templates. I haven’t seen any material on that selection process from Incra.

Thanks!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com