Reply by Loren

  • Advertise with us

Posted on Making 2" Posts

View Loren's profile


11194 posts in 4732 days

#1 posted 10-01-2013 08:10 PM

You can glue it on full thickness and rip it off. Then do the other
side. Then plane to square. Gluing it on at 1/8” thick creates a
situation where you’ll need to mess with cauls. You may still
need to use cauls a few times, but as long the stock is more than
about 3/8” you can probably skip them and get good glue lines.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics