Reply by toolie

  • Advertise with us

Posted on Blade alignment

View toolie's profile


2165 posts in 3112 days

#1 posted 07-15-2013 06:50 PM

+1 on EE’s comments. i own two emerson built 10” CI TSs and neither experience the noted problem. i’d try removing the blade and checking the arbor and the arbor flange for run out. i’d also replace the blade with a piece of 3/4” MDF (as it’s stable, rigid and dead flat). recheck the measurements to ensure it isn’t something weird about the blade. also, remember to lock the blade tilt lock lever (just above the elevation handle) prior to changing blade elevation. it won’t take much blade tilt to have it looking like the blade is moving either towards or away from the miter slot as it’s elevation is adjusted.

-- there's a solution to every just have to be willing to find it.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics