Reply by niki

  • Advertise with us

Posted on Router table fence setting

View niki's profile


426 posts in 5045 days

#1 posted 07-01-2007 08:13 AM

Thank you Tom and Karson

You are correct, I have some left overs but for the new router table (the one in the pics) I bought new panels.

I used them instead of plywood or MDF because they are tough (HDF), covered with Plastic laminate from both sides, very consistent in thickness, very flat and glue very good and fast with CA (super glue).

I use them also as “Runners” for the TS sled because they are very slippery (my runners are usually narrower that the miter slot width).

The runner (tongue) that you see on the pics above, is also a piece of 8mm (5/16”) Floor panel, I made the slot with 8mm bit and the floor panel fits like a glove.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics