Reply by bandit571

  • Advertise with us

Posted on Craftsman 113 table saw fence upgrade?

View bandit571's profile


23984 posts in 3226 days

#1 posted 06-03-2013 07:54 PM

I have the OEM fence on mine,still. Was with the saw when new. Only “upgrade” was a piece of 1x stock screwed to the fence. Then a jointer plane to straighten things out. Has been working ever since.

Note: scale for the fence is long gone, wasn’t that great anyway. I use a combo square to set the width. Referenced at the front and back ends of the fence, from a miter slot. I just have to remember which side of the blade I went from.

Plastic handle broke off, stripped the rod, too. New steel rod, and a steel bar the same size as the old handle were added. Black tape on the new handle, for grip.

and in use for dados

-- A Planer? I'M the planer, this is what I use

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics